I just picked up a 04 Legacy Tribute in NOS condition. However there was no Tremolo arm, I have found one from a ASAT will it fit?
Thanks in advance for the info.
04 Legacy help (Please)
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
04 Legacy help (Please)
Screw Milk... Got Wood
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: 04 Legacy help (Please)
Check the diameter of the ASAT's trem bar. If the diameter is approximately 0.23" or 5.84mm it will fit.Luthier-Atlanta wrote:I just picked up a 04 Legacy Tribute in NOS condition. However there was no Tremolo arm, I have found one from a ASAT will it fit?
Thanks in advance for the info.
Check out the G&L On-Line Store for getting a replacement.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
Re: 04 Legacy help (Please)
Thanks for the quick reply, I have gone to their site and to no avail I'm afraid. I also sent them an e-mail today so I will wait to see what comes of that.
I thank you for the measurement, I am waiting on the individual to answer my message.
I thank you for the measurement, I am waiting on the individual to answer my message.
Screw Milk... Got Wood
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: 04 Legacy help (Please)
What other information are you trying to get? And who did you email at G&L?Luthier-Atlanta wrote:Thanks for the quick reply, I have gone to their site and to no avail I'm afraid. I also sent them an e-mail today so I will wait to see what comes of that.
I thank you for the measurement, I am waiting on the individual to answer my message.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
Re: 04 Legacy help (Please)
No other information at this point, just finding where I can purchase the trem arm and what years/models will fit.
As far as who I e-mailed, good question it was their generic e-mail address..
As far as who I e-mailed, good question it was their generic e-mail address..
Screw Milk... Got Wood
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: 04 Legacy help (Please)
Here is the link to the replacement trem bar you can order from the G&L On-Line Store: VIBRATO ARM - G&L DUAL FULCRUM (CURRENT). BTW, that is where I got the diameter measurement I posted earlier.Luthier-Atlanta wrote:No other information at this point, just finding where I can purchase the trem arm and what years/models will fit.
As far as who I e-mailed, good question it was their generic e-mail address..
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
Re: 04 Legacy help (Please)
Wow, I'll say! I am not sure how you found that on their site, when I open there parts area there are 5 or so listings and that's all.
Thank you very much for your help, I am really digging this guitar and UI have a few guitars to choose from. I like it so much I am researching others...
Thank you very much for your help, I am really digging this guitar and UI have a few guitars to choose from. I like it so much I am researching others...
Screw Milk... Got Wood
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: 04 Legacy help (Please)
There is a link to their On-Line Store in the main menu of the G&L website. That's the link I provided in my earlier post.Luthier-Atlanta wrote:Wow, I'll say! I am not sure how you found that on their site, when I open there parts area there are 5 or so listings and that's all.
Thank you very much for your help, I am really digging this guitar and UI have a few guitars to choose from. I like it so much I am researching others...
Under Product Categories, select BRIDGE COMPONENTS and you will see them.
Glad to be some help.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 13
- Joined: Mon Aug 31, 2015 4:05 pm
- Location: Marietta, Ga.
Re: 04 Legacy help (Please)
Now I feel dumb, I click on most of the others.....
Ouch.
Ouch.
Screw Milk... Got Wood