04 Legacy help (Please)

The place to discuss, post photos, video, and audio of the G&L products (US instruments, stomp boxes, etc.) produced after 1991, including the amps & gear we use with them.
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

04 Legacy help (Please)

Post by Luthier-Atlanta »

I just picked up a 04 Legacy Tribute in NOS condition. However there was no Tremolo arm, I have found one from a ASAT will it fit?
Thanks in advance for the info. :)
Screw Milk... Got Wood
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: 04 Legacy help (Please)

Post by Craig »

Luthier-Atlanta wrote:I just picked up a 04 Legacy Tribute in NOS condition. However there was no Tremolo arm, I have found one from a ASAT will it fit?
Thanks in advance for the info. :)
Check the diameter of the ASAT's trem bar. If the diameter is approximately 0.23" or 5.84mm it will fit.

Check out the G&L On-Line Store for getting a replacement.

Hope this helps.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

Re: 04 Legacy help (Please)

Post by Luthier-Atlanta »

Thanks for the quick reply, I have gone to their site and to no avail I'm afraid. I also sent them an e-mail today so I will wait to see what comes of that.

I thank you for the measurement, I am waiting on the individual to answer my message.
Screw Milk... Got Wood
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: 04 Legacy help (Please)

Post by Craig »

Luthier-Atlanta wrote:Thanks for the quick reply, I have gone to their site and to no avail I'm afraid. I also sent them an e-mail today so I will wait to see what comes of that.

I thank you for the measurement, I am waiting on the individual to answer my message.
What other information are you trying to get? And who did you email at G&L? :?:

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

Re: 04 Legacy help (Please)

Post by Luthier-Atlanta »

No other information at this point, just finding where I can purchase the trem arm and what years/models will fit.
As far as who I e-mailed, good question it was their generic e-mail address.. :?
Screw Milk... Got Wood
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: 04 Legacy help (Please)

Post by Craig »

Luthier-Atlanta wrote:No other information at this point, just finding where I can purchase the trem arm and what years/models will fit.
As far as who I e-mailed, good question it was their generic e-mail address.. :?
Here is the link to the replacement trem bar you can order from the G&L On-Line Store: VIBRATO ARM - G&L DUAL FULCRUM (CURRENT). BTW, that is where I got the diameter measurement I posted earlier.

Hope this helps.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

Re: 04 Legacy help (Please)

Post by Luthier-Atlanta »

Wow, I'll say! I am not sure how you found that on their site, when I open there parts area there are 5 or so listings and that's all.

Thank you very much for your help, I am really digging this guitar and UI have a few guitars to choose from. I like it so much I am researching others...
Screw Milk... Got Wood
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

Re: 04 Legacy help (Please)

Post by Luthier-Atlanta »

A couple of pic's.

Image

Image
Screw Milk... Got Wood
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: 04 Legacy help (Please)

Post by Craig »

Luthier-Atlanta wrote:Wow, I'll say! I am not sure how you found that on their site, when I open there parts area there are 5 or so listings and that's all.

Thank you very much for your help, I am really digging this guitar and UI have a few guitars to choose from. I like it so much I am researching others...
There is a link to their On-Line Store in the main menu of the G&L website. That's the link I provided in my earlier post.
Under Product Categories, select BRIDGE COMPONENTS and you will see them.

Glad to be some help.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
Luthier-Atlanta
Posts: 13
Joined: Mon Aug 31, 2015 4:05 pm
Location: Marietta, Ga.

Re: 04 Legacy help (Please)

Post by Luthier-Atlanta »

Now I feel dumb, I click on most of the others.....

Ouch.
Screw Milk... Got Wood