Commemorative Legacy proto ??
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Commemorative Legacy proto ??
.and just when you thought you've seen it all:
http://www.ebay.com/itm/G-L-Leo-Fender- ... 4ac96190b7
Hard to see the Lacewood figuring, the seller mentions it still has that smell ( olfactory delights from that ol'factory , is that why they call it NOS ? )
http://www.ebay.com/itm/G-L-Leo-Fender- ... 4ac96190b7
Hard to see the Lacewood figuring, the seller mentions it still has that smell ( olfactory delights from that ol'factory , is that why they call it NOS ? )
Last edited by Elwood on Thu Sep 12, 2013 9:47 pm, edited 1 time in total.
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Commemorative Legacy proto
Don't even get me started. Once upone a time when I was a particle physicist I did an experiment where I made Yamato collide with Master of the Broadcaster. In one way or another this person was found among the reaction products ...
- Jos
-
- Posts: 369
- Joined: Fri Feb 18, 2011 2:05 pm
- Location: Victoria, B.C, Canada.
Re: Commemorative Legacy proto
Wow, five way rotary switch?
That could get a little awkward, but really neat too.
That could get a little awkward, but really neat too.
-
- Posts: 2344
- Joined: Thu Feb 17, 2011 7:18 pm
- Location: None of the above
Re: Commemorative Legacy proto
I couldn't believe it when I saw this on CL last week.
Ken
Ken
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Commemorative Legacy proto
The rotary switch to select pickups has been used before most notably in Paul Reed Smith's early Customs. My PRS Artist II has a 5-position rotary switch and my main peeve is the absence of an easy visual cue what position you are in.Ahryn wrote:Wow, five way rotary switch?
That could get a little awkward, but really neat too.
- Jos
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Re: Commemorative Legacy proto
Alembic has been using them since the early 70's, not everyone knows from where the rivers flow, so yeah...PRS.yowhatsshakin wrote:The rotary switch to select pickups has been used before most notably in Paul Reed Smith's early Customs. My PRS Artist II has a 5-position rotary switch and my main peeve is the absence of an easy visual cue what position you are in.Ahryn wrote:Wow, five way rotary switch?
That could get a little awkward, but really neat too.
- Jos
I'm confused, was this a reply to the deleted off topic posts? or ?yowhatsshakin wrote:
Don't even get me started. Once upone a time when I was a particle physicist I did an experiment where I made Yamato collide with Master of the Broadcaster. In one way or another this person was found among the reaction products ...
- Jos
-
- Posts: 2344
- Joined: Thu Feb 17, 2011 7:18 pm
- Location: None of the above
Re: Commemorative Legacy proto
PRS also used a five-way switch on their basses back in the 80s. I remember Gibson using them on some B.B. King-endorsed models in the late 90s or early 00s as well.
Ken
Ken
-
- Posts: 2153
- Joined: Fri Feb 15, 2013 12:11 pm
- Location: Dayton , Ohio
Re: Commemorative Legacy proto
KenC wrote:PRS also used a five-way switch on their basses back in the 80s. I remember Gibson using them on some B.B. King-endorsed models in the late 90s or early 00s as well.
Ken
there is a used BB King Signeture 355 Gibson at my local G & L dealer with rotary switch right now 1895.00
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Commemorative Legacy proto
I've moved this out of the PSA sub-forum since it's really become more....
I had an email discussion with Dave and Dean about this earlier today:
I asked if this was a legit Commemorative Legacy prototype. Dave replied "Looks like a mid ‘90s employee guitar to me."
And Dean commented "I sure wouldn't call it a Commemorative other that body wood it has nothing to do with those guitars. Dave is probably right, it's an employee built guitar made from a left over piece of Lacewood that sat around the factory or was stashed away from that time."
Dave replied "Ha ha, I was feeling diplomatic but Dean hit exactly what I was thinking. : )".
I commented "Body wood looks like swamp ash to me." And Dave replied with "The photos sucked, but that was my impression too. Nice how the serial number was totally out of focus."
So, I say buyer beware
I had an email discussion with Dave and Dean about this earlier today:
I asked if this was a legit Commemorative Legacy prototype. Dave replied "Looks like a mid ‘90s employee guitar to me."
And Dean commented "I sure wouldn't call it a Commemorative other that body wood it has nothing to do with those guitars. Dave is probably right, it's an employee built guitar made from a left over piece of Lacewood that sat around the factory or was stashed away from that time."
Dave replied "Ha ha, I was feeling diplomatic but Dean hit exactly what I was thinking. : )".
I commented "Body wood looks like swamp ash to me." And Dave replied with "The photos sucked, but that was my impression too. Nice how the serial number was totally out of focus."
So, I say buyer beware
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Re: Commemorative Legacy proto
thx Craig,
IIRC ,with some zooming and some squinting,the serial is something like G033xxx.
So that would make it a CONmemorative eh?
IIRC ,with some zooming and some squinting,the serial is something like G033xxx.
So that would make it a CONmemorative eh?
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: Commemorative Legacy proto
that should be the varitone switch.Fumble fingers wrote:KenC wrote:PRS also used a five-way switch on their basses back in the 80s. I remember Gibson using them on some B.B. King-endorsed models in the late 90s or early 00s as well.
Ken
there is a used BB King Signeture 355 Gibson at my local G & L dealer with rotary switch right now 1895.00
-
- Posts: 2344
- Joined: Thu Feb 17, 2011 7:18 pm
- Location: None of the above
Re: Commemorative Legacy proto
It looks like G033675 to me. That one's not in the Registry.Elwood wrote:thx Craig,
IIRC ,with some zooming and some squinting,the serial is something like G033xxx.
So that would make it a CONmemorative eh?
Ken
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Commemorative Legacy proto
Looks more like G033678 to me but 1) that would still be an unregistered S/N and 2) who gives a hoot?KenC wrote:It looks like G033675 to me. That one's not in the Registry.
I wish you could mark certain auctions as an attempt to swindle unsuspecting people out of money or instruments worth substantially more than one on auction. Bur alas ... You wonder why the seller states " I might accept EASILY re-sold trades." (capitalization not mine) ...
- Jos
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Re: Commemorative Legacy proto
Yeah, that seller sure can spew the speel,
His ego aside, 750 for a swamp ash three bolt Legacy in exc. condition isn't too far off base.
His ego aside, 750 for a swamp ash three bolt Legacy in exc. condition isn't too far off base.
-
- Posts: 369
- Joined: Fri Feb 18, 2011 2:05 pm
- Location: Victoria, B.C, Canada.
Re: Commemorative Legacy proto ??
heh, maybe the seller will get wise and sell it as an employee guitar.
at a lower rate
at a lower rate