Invader Questions

The place to discuss, post photos, video, and audio of the G&L products (US instruments, stomp boxes, etc.) produced after 1991, including the amps & gear we use with them.
User avatar
darwinohm
Posts: 3218
Joined: Mon Mar 01, 2010 1:13 pm
Location: Minneapolis/St Paul

Invader Questions

Post by darwinohm »

I am least familiar with the invaders in the G&L line. My questions are specifically to a 2006 Invader 2H with a saddle lock bridge. It appears to me that the body shape of the Comanche, Invader, Legacy and the S-500 are the same. This Invader has a push pull vol and tone which I am assuming is to split each pickup individually. Is this the same basically as a Legacy 2HB other than the Legacy has a pickguard and if the Legacy were ordered with the saddle lock? I have searched the forum and looked in the Gallery and did not find any wiring diagrams on the Invader. Thanks for any information.-- Darwin
User avatar
SouthpawGuy
Posts: 561
Joined: Tue Feb 09, 2010 7:24 am

Re: Invader Questions

Post by SouthpawGuy »

Hi Darwin, the Invader is a different body shape to the Legacy /S500/ Comanche. The upper horn is longer.

Mine is an Invader Plus in lefty from about 2003, bought it used it was a custom order by the first owner.

Image

Image

Image

Image

The body edges are also more square than a Legacy, less rounded off.

Mine is HSH with a five way switch and a separate mini switch to split the humbucker.

Hope this helps.
Image
User avatar
Elwood
Posts: 2498
Joined: Tue Feb 09, 2010 2:00 am
Location: Canada's Mexico

Re: Invader Questions

Post by Elwood »

SouthpawGuy wrote:

Image
That's a beautiful Invader !!
User avatar
darwinohm
Posts: 3218
Joined: Mon Mar 01, 2010 1:13 pm
Location: Minneapolis/St Paul

Re: Invader Questions

Post by darwinohm »

SPG, that does help and what a beautiful invader you have. I looked at pictures on the G&L web site and didn't notice the difference in the horn length. Yours has a gorgeous top with the binding. Sweet! Thanks-- Darwin
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Invader Questions

Post by Craig »

darwinohm wrote:I am least familiar with the invaders in the G&L line. My questions are specifically to a 2006 Invader 2H with a saddle lock bridge. It appears to me that the body shape of the Comanche, Invader, Legacy and the S-500 are the same. This Invader has a push pull vol and tone which I am assuming is to split each pickup individually. Is this the same basically as a Legacy 2HB other than the Legacy has a pickguard and if the Legacy were ordered with the saddle lock? I have searched the forum and looked in the Gallery and did not find any wiring diagrams on the Invader. Thanks for any information.-- Darwin
As mentioned, the body is different, see: Current G&L Guitar Body Shapes

Does it look like one of these?

Image

The wiring is similar to the Legacy 2HB (2 knob version), but without the coil tap switch.

Hope this helps.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
darwinohm
Posts: 3218
Joined: Mon Mar 01, 2010 1:13 pm
Location: Minneapolis/St Paul

Re: Invader Questions

Post by darwinohm »

Thanks Craig, it is exactly like the Blueburst. That helps as I didn't notice the upper horn difference that Southpaw mentioned. I will look at the Legacy 2h wiring diagram. I am not sure if the push pull pots have been added or are standard. -- Darwin
Boogie Bill
Posts: 793
Joined: Tue Mar 02, 2010 1:16 pm
Location: Portland, Oregon

Re: Invader Questions

Post by Boogie Bill »

All of the Invaders I've played had the 1-11/16" neck and the standard coil split. I've seen two that I'm kicking myself for not buying.

Bill
User avatar
darwinohm
Posts: 3218
Joined: Mon Mar 01, 2010 1:13 pm
Location: Minneapolis/St Paul

Re: Invader Questions

Post by darwinohm »

Thanks Bill, this one has a 1 5/8 neck and is in unplayed condition. It has push pull pots which I believe are not stock. They eluded to it having a wiring problem and I love that. Negotiating power doesn't hurt. I don't need another guitar and am doing the research and we will see what happens. When I came back today Ginny asked if I had bought myself a birthday present. Doesn't that sound like the okay????? -- Darwin
louis cyfer
Posts: 3011
Joined: Tue Oct 25, 2011 2:58 pm

Re: Invader Questions

Post by louis cyfer »

darwinohm wrote:Thanks Craig, it is exactly like the Blueburst. That helps as I didn't notice the upper horn difference that Southpaw mentioned. I will look at the Legacy 2h wiring diagram. I am not sure if the push pull pots have been added or are standard. -- Darwin
it's not just the upper horn darwin. the whole body is different. both horns, both cutaways and the rest of the body as well.
User avatar
SouthpawGuy
Posts: 561
Joined: Tue Feb 09, 2010 7:24 am

Re: Invader Questions

Post by SouthpawGuy »

darwinohm wrote:Thanks Bill, this one has a 1 5/8 neck and is in unplayed condition. It has push pull pots which I believe are not stock. They eluded to it having a wiring problem and I love that. Negotiating power doesn't hurt. I don't need another guitar and am doing the research and we will see what happens. When I came back today Ginny asked if I had bought myself a birthday present. Doesn't that sound like the okay????? -- Darwin

GAS is a terrible thing.

:mrgreen:
Image
User avatar
darwinohm
Posts: 3218
Joined: Mon Mar 01, 2010 1:13 pm
Location: Minneapolis/St Paul

Re: Invader Questions

Post by darwinohm »

SPG, i wish I was getting paid to do research! Louis, you are correct I am sure but my old eyes didn't catch any of this initially. Seeing it later I can see the upper horn lines up on a higher fret but the rest I cannot see unless I had them next to each other. If it hangs around for a while I may rescue it.-- Darwin