Spec Sheet from Tim at BB from 2003?
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Spec Sheet from Tim at BB from 2003?
I’m now the proud owner a G&L 2003 Tobacco Sunburst S-500 Mahogany Special Build serial number CLF30614 with a Rosewood finger board and a DF Vibrato System. I bought it second hand (maybe third). I'm trying to get the information off of the spec sheet for the guitar, for example date of build, neck radius and such. I tried contacting Buffalo Bros, they referred my back here and told me to ask for Tim.I'd appreciate any help. Thanks. Drew
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Spec Sheet from Tim at BB from 2003?
Are you sure it is not a 2004? In this Production List of G&L Instruments (USA) (and scrolling down a bit), you'll find a series of mahogany bodies guitars that were all produced in small quantities; less than 25 in your case. These were Special Build instruments but without the then customary CCD logo on the headstock or Silver Certificate of Authenticity. I believe all hogs built in 2004 had ebony boards (which is true for both the ASAT Super and the ASAT HB I have) but for instance the 2005 hog ASAT Classic Bluesboys have rosewood boards. A picture would be helpful here. Otherwise it will have the standard S-500 accoutrements, but with pre-2006 imperial sized arm, bolts, nuts, and what not. And more importantly: set-up. The usage of PLEK technology would have to wait another 2 years.
Hope this helps,
- Jos
Hope this helps,
- Jos
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Re: Spec Sheet from Tim at BB from 2003?
The reason I guessed 2004 is because that's what came up when I punched the serial number into the G&L registry. I did notice the conflicting data with the other Mahogany Special builds -all from 2004, but the registry indicates Rosewood boards. I have the certificate of authenticity, and I don't think it's silver; the seal is blue. Picture is posted at: http://s1171.photobucket.com/albums/r55 ... g60_58.jpg.
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Spec Sheet from Tim at BB from 2003?
That is the Phyllis Fender 'signed' certificate with the S/N that had been part of every G&L since about '92-'93.building96 wrote:... I have the certificate of authenticity, and I don't think it's silver; the seal is blue. ...
- Jos
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Spec Sheet from Tim at BB from 2003?
According to the Registry entry comments in the Other Features on this guitar:yowhatsshakin wrote:Are you sure it is not a 2004? In this Production List of G&L Instruments (USA) (and scrolling down a bit), you'll find a series of mahogany bodies guitars that were all produced in small quantities; less than 25 in your case. These were Special Build instruments but without the then customary CCD logo on the headstock or Silver Certificate of Authenticity. I believe all hogs built in 2004 had ebony boards (which is true for both the ASAT Super and the ASAT HB I have) but for instance the 2005 hog ASAT Classic Bluesboys have rosewood boards. A picture would be helpful here. Otherwise it will have the standard S-500 accoutrements, but with pre-2006 imperial sized arm, bolts, nuts, and what not. And more importantly: set-up. The usage of PLEK technology would have to wait another 2 years.
Hope this helps,
- Jos
Perhaps Tim Page will see this post and provide some history regarding these two special ordered guitars.1 of 2 on special order by Buffalo Bros before 2004 LE models.
AFAIK, the only difference between the S-500 Mahogany Special Build and
the standard production S-500 models is the Mahogany body finished in Tobacco Sunburst.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Re: Spec Sheet from Tim at BB from 2003?
Yes, the mention of "1 of 2 on special order by Buffalo Bros before 2004 LE models" as a feature of this serial number interested me. Prior to my claiming it, this comment was already posted. I love the guitar. Thanks for the support G&L.com.
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Re: Spec Sheet from Tim at BB from 2003?
The fret board is close to a 9.5".
Last edited by building96 on Wed Aug 22, 2012 2:37 pm, edited 1 time in total.
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Re: Spec Sheet from Tim at BB from 2003?
Tim, any idea what the script on the inside of this oe means?
http://s1171.photobucket.com/albums/r55 ... 721002.jpg
Thanks.
Drew
http://s1171.photobucket.com/albums/r55 ... 721002.jpg
Thanks.
Drew
-
- Posts: 6
- Joined: Mon Jun 11, 2012 2:55 pm
Re: Spec Sheet from Tim at BB from 2003?
Tim, in regards to the hardtail variety, was it signed by Mr. Fullerton on the back of the headstock?