I bought this used recently. Vintage White would not have been my first choice of color, but the price was right and I had been wanting to try one for a while. The only complaint I have is that the vibrato bar sits a bit too flat to the top of the guitar. I just need to put it in a vise and give a little bit more of a bend.
SC-2 Reissue, Vintage White
-
- Posts: 3218
- Joined: Mon Mar 01, 2010 1:13 pm
- Location: Minneapolis/St Paul
Re: SC-2 Reissue, Vintage White
Welcome to the forum and thanks for posting the picture of the SC-2. I recently bought a Fullerton Red Sc2, very much like the one in your photo (DF) and it is a terrific guitar.-- Darwin
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: SC-2 Reissue, Vintage White
there is nothing wrong with the vibrato bar, the bridge is tilting forward too much, that is why the bar appears too flat to the guitar. tighten the springs in the back. the df trem doesn't have to tilt lie a fender trem. don't hurt the bar.
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: SC-2 Reissue, Vintage White
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: SC-2 Reissue, Vintage White
in that post it doesn't say it, but the bridgeplate is parallel to the body. it is apparent in the photos.Craig wrote:To get it setup to factory specs, see: SC-2 model DF vibrato bridge setting.
Hope this helps.
-
- Posts: 7
- Joined: Sun Nov 06, 2011 4:12 pm
Re: SC-2 Reissue, Vintage White
Thanks for the pointers. The bridge is tilted forward subtly. I will correct this and it should put the bar at a more comfortable angle.
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: SC-2 Reissue, Vintage White
The post I pointed to has a link to the original Owners Manual, which has the step by step details and it does say it there.louis cyfer wrote:in that post it doesn't say it, but the bridgeplate is parallel to the body. it is apparent in the photos.Craig wrote:To get it setup to factory specs, see: SC-2 model DF vibrato bridge setting.
Hope this helps.
Here are the pages:
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: SC-2 Reissue, Vintage White
thank you. that should really help him. i didn't notice that link when i looked at the thread. i just looked at the pics.Craig wrote:The post I pointed to has a link to the original Owners Manual, which has the step by step details and it does say it there.louis cyfer wrote:in that post it doesn't say it, but the bridgeplate is parallel to the body. it is apparent in the photos.Craig wrote:To get it setup to factory specs, see: SC-2 model DF vibrato bridge setting.
Hope this helps.
Here are the pages:
Hope this helps.