February 1-August 31, 2017 G&L U.S. Specifications & Options

[Craig]

This information is based upon the U.S. Dealer Price List dated February 1, 2017 (except where noted)

Click link to view the REDACTED_U.S._Dealer_Price_List.

COMMON SPECIFICATIONS AND FEATURES

Unless noted in the model listing, the following standard specifications are shared among models in this price list.

Neck wood: hard rock maple with rosewood or maple fingerboard
Frets: medium-jumbo Jescar 57110 18% Nickel Silver
Nut: 100% natural bone
Pickguard (where applicable): 3-ply white
Case: Deluxe Tolex

Standard bridges for various models. Exceptions or additional features are noted in model listings.

ASAT® Classic variants: G&L traditional boxed steel bridge with six brass saddles
All other ASAT® models, Fallout™, F-100™, SC-2™: G&L Saddle Lock bridge with brass saddles
All Legacy®, S-500™, Comanche® variants: G&L Dual-Fulcrum Vibrato with brass saddles and brass block
All 4-string basses: G&L Saddle Lock bridge with brass saddles
All 5-string basses: G&L Saddle Lock bridge with brass saddles

Tuners / Machine Heads. Exceptions or additional features are noted in model listings.

All guitars: G&L sealed back with tapered post
All basses: G&L Ultra-Lite with aluminum tapered post

Left-handed versions are available on all instruments except where noted as "(right-hand only)".

USA GUITARS

Doheny™ [New-added September 12, 2017]
Photos of the new Doheny model ...
CONSTRUCTION: bolt-on
SCALE: 25 1/2"
PICKUPS: Leo Fender† wide-bobbin MFD™ single coil
BODY WOOD: Swamp Ash on Premier Finishes, Alder on Standard Finishes
NECK WOOD: Hard-Rock Maple with Maple or Rosewood fingerboard
NECK PROFILE: G&L Modern Classic with 9 1/2" radius (all radius options are available; no neck profile options are available at this time)
NUT: 100% natural bone
FRETS: 21 medium jumbo, nickel, Plek dressed
TUNING KEYS: 12:1 ratio, sealed-back
BRIDGE: Dual-Fulcrum standard or Saddle-lock optional
CONTROLS: 3-position toggle, volume, PTB tone circuit
CASE: deluxe Tolex hardshell

Fullerton Standard [New-added March 2017]

Fullerton Standard instruments are produced in short production runs, and each run features a different model and/or color.
Every Fullerton Standard model comes with a G&L gig bag and includes Plek fret processing for superb playability.
Delivering unsurpassed quality and value in an authentic USA G&L made in Leo’s historic Fender Avenue factory
in Fullerton, California.

ASAT® Classic Fullerton Standard (New model-added March 2017)
Photos of the New ASAT® Classic Fullerton Standard model
Pickups: two traditional size G&L Magnetic Field Design single-coil pickups
Controls: 3-way pickup selector, volume, tone
Neck wood: Hard-Rock Maple with Maple fingerboard
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder
Finish: Spanish Copper Metallic, Vintage White
Includes: G&L Gig Bag
Note: No options available with this model

Legacy® Fullerton Standard (New model-added June 2017) (Note: G&L website spec page not yet available)
Photos of the New G&L Fullerton Standard Legacy
Pickups: three G&L CLF-100 Alnico single coils
Controls: 5-way pickup selector, volume, PTB system
Neck wood: Hard-Rock Maple with Rosewood fingerboard
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder
Finishes:
Graphite Metallic, 3-ply black pickguard
Ruby Red Metallic, 3-ply black pickguard
Emerald Blue Metallic, 3-ply white pickguard
Choice of gloss or frost finish
Includes: G&L Gig Bag
Note: No other options available with this model

ASAT® Classic
Pickups: two traditional size G&L Magnetic Field Design single-coil pickups
Controls: 3-way pickup selector, volume, tone
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

ASAT® Classic Semi-Hollow
Same as ASAT Classic, except features twin voice chambers on the left and right sides of the body.
Standard and Premier finishes included, with swamp ash body.
Choose with or without F-hole.

ASAT® Classic Alnico
Same as ASAT Classic, except features G&L Alnico single coil pickups.

ASAT® Classic Bluesboy
Same as ASAT Classic, except G&L A2S4248N Alnico II magnet humbucker in neck position.

ASAT® Classic Bluesboy Semi-Hollow
Same as ASAT Classic Bluesboy, except features twin voice chambers on the left and right sides of the body.
Standard and Premier finishes included with swamp ash body.
Choose with or without F-hole.

ASAT® Classic Bluesboy 90
Same as ASAT Classic except features G&L AP4285B P-90 in neck position.

ASAT® Classic Bluesboy 90 Semi-Hollow
Same as ASAT Classic Bluesboy 90 except features voice chambers on left and right sides of body.
Standard and Premier finishes included with swamp ash body.
Choose with or without F-hole.

ASAT® Classic Solamente / Solamente Alnico
Single-pickup ASAT Classic with 3-way tone circuit. Choose G&L MFD bridge pickup or G&L Alnico bridge pickup.

ASAT® Classic S
Same as ASAT Classic except features G&L S-500 middle pickup, 5-way pickup selector,
push/pull tone pot to enable neck+bridge or all three pickups together.

ASAT® Classic S Alnico
Same as ASAT Classic Alnico except features G&L Legacy Alnico middle pickup, 5-way pickup selector,
push/pull tone pot to enable neck+bridge or all three pickups together.

ASAT® Special
Pickups: two jumbo G&L Magnetic Field Design single-coil pickups
Controls: 3-way pickup selector, volume, tone
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

ASAT® Special Semi-Hollow
Same as ASAT Special, except features twin voice chambers on the left and right sides of the body.
Standard and Premier finishes included with swamp ash body.
Choose with or without F-hole.

ASAT® Z-3 (right-hand only)
Pickups: three Z-coil G&L Magnetic Field Design hum-cancelling pickups
Controls: 5-way pickup selector, volume, tone with push/pull to enable neck+bridge or all three pickups together
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

ASAT® Z-3 Semi-Hollow (right-hand only)
Same as ASAT Z-3 except features voice chambers on left and right sides of body.
Standard and Premier Finishes included with swamp ash body.
Choose with or without F-hole.

ASAT® Deluxe
Pickups: G&L AS255B humbucker in neck position
G&L AW4470B humbucker in bridge position
Controls: rear mounted 3-way pickup selector, volume, tone with push/pull
coil split for both humbuckers
Neck profile: Modern Classic
Radius: 9.5”
Body wood: wood-bound premium flame top on mahogany
Finish: Standard and Premier finishes included

ASAT® Deluxe Semi-Hollow
Same as ASAT Deluxe except features voice chambers on left and right sides of body.
Standard and Premier Finishes included. Choose with or without F-hole.

ASAT® HH RMC NEW!
Photos of the New ASAT HH RMC model
Pickups: G&L AS4255B humbucker in neck position
G&L AW4470B humbucker in bridge position
Controls: 3-way pickup selector, volume, tone with push/pull coil split for both humbuckers
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

F-100™ (right-hand only)
Pickups: Two G&L Magnetic Field Design humbuckers
Controls: rear mounted 3-way pickup selector, volume, tone
Neck profile: Classic C (no neck profile options)
Radius: 12”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard and Premier finishes included

Fallout™
Pickups: G&L AP4285B P-90, G&L AW4470B Alnico humbucker
Controls: 3-way pickup selector, volume, tone with push/pull coil split
Neck profile: Slim C (neck profile options must be 1 5/8” nut width only)
Radius: 12”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Legacy®
Pickups: three G&L CLF-100 Alnico single coils
Controls: 5-way pickup selector, volume, PTB system
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Legacy® HSS
Pickups: G&L CLF-100 Alnico single coil in neck and middle positions; G&L AW4470W humbucker in bridge position
Controls: 5-way pickup selector, volume, PTB system, mini-toggle coil split for bridge humbucker
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Legacy® HSS RMC
Photos of the Legacy® HSS RMC model
Same as Legacy HSS except no pickguard, black pickups, rear mount controls, push/pull coil split, chrome knurled knobs.

Legacy® HH
Pickups: G&L AS4255W humbucker in neck position; G&L AW4470W humbucker in bridge position
Controls: 3-way pickup selector, volume, PTB system, mini-toggle coil split for both humbuckers
Bridge: G&L Dual-Fulcrum Vibrato with brass saddles
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Legacy® HH RMC
Photos of the Legacy® HH RMC model
Same as Legacy HH except no pickguard, black pickups, rear mount controls, push/pull coil split, chrome knurled knobs.

Legacy® Special
Pickups: G&L Dual Blade in neck and middle positions; G&L Power Blade in bridge position
Controls: 5-way pickup selector, volume, PTB system
Bridge: G&L Dual-Fulcrum Vibrato with brass saddles
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes

S-500™
Pickups: three G&L S-500 Magnetic Field Design single coils
Controls: 5-way pickup selector, volume, PTB system, mini-toggle switch to enable neck+bridge or all three pickups together
Neck profile: Modern Classic
Radius: 9.5”
Body wood: Alder on standard and solid finishes, Swamp Ash on Premier finishes
Finish: Standard finishes included

S-500™ RMC NEW (Note: G&L website spec page not yet available)
Photos of New S-500 RMC model
Same as S-500 except no pickguard, black pickups, rear mount controls, push/pull to enable neck+bridge or all three pickups together, chrome knurled knobs.

Comanche® (right-hand only)
Pickups: three G&L Z-coil Magnetic Field Design hum canceling
Controls: 5-way pickup selector, volume, PTB system, mini-toggle switch to enable neck+bridge or all three pickups together
Neck profile: Modern Classic
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

SC-2™ (right-hand only)
Pickups: two jumbo G&L Magnetic Field Design single-coil pickups
Controls: rear mounted 3-way pickup selector, volume, tone
Neck profile: Classic C (no neck profile options)
Radius: 12”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Rampage® Jerry Cantrell Signature Model (right-hand only)
Pickups: Seymour Duncan TB-4 humbucker in bridge position
Controls: rear mounted volume
Bridge: Kahler 2320 pro series brass vibrato
Neck wood: hard rock maple with ebony fingerboard
Neck profile: 1 3/4” nut width custom JC profile
Radius: 14”
Nut: Floyd Rose locking
Hardware: black
Body wood: soft maple
Finish: Black, Ivory or Whiskey with matching headstock

Superhawk™ Jerry Cantrell Signature Model (right-hand only)
Pickups: Seymour Duncan ’59 humbucker in neck position; Seymour Duncan TB-4 humbucker in bridge position
Controls: rear mounted 3-way pickup selector, volume, tone with push/pull to split both humbuckers
Bridge: G&L Saddle Lock bridge with brass saddles
Neck wood: hard rock Maple with Ebony fingerboard
Neck profile: 1 3/4” nut width custom JC profile
Radius: 14”
Nut: 100% natural bone
Hardware: black
Body wood: soft maple
Finish: Black, Ivory or Whiskey with matching headstock

Superhawk™ Deluxe Jerry Cantrell Signature Model (right-hand only)
Pickups: Seymour Duncan ’59 humbucker in neck position; Seymour Duncan TB-4 humbucker in bridge position
Controls: rear mounted 3-way pickup selector, volume, tone with push/pull to split both humbuckers
Bridge: G&L Saddle Lock bridge with brass saddles
Neck wood: hard rock maple with ebony fingerboard
Neck profile: 1 3/4” nut width custom JC profile
Radius: 14”
Nut: 100% natural bone
Hardware: chrome
Body wood: soft maple
Finish: Blackburst or Blueburst with Black headstock

USA BASSES

ASAT® Bass
Pickups: two G&L Magnetic Field Design humbuckers
Controls: G&L Tri-Tone active/passive electronics, 3-way mini-toggle pickup selector, series/parallel mini-toggle,
preamp control mini-toggle (off/on/on with high frequency EQ boost), volume, treble, bass
Neck profile: 1 1/2” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes includes rear contour
Finish: Standard finishes included

ASAT® Bass Semi-Hollow
Same as ASAT Bass except features voice chambers on left and right sides of body.
Standard and Premier Finishes included with swamp ash body.
Choose with or without F-hole.

ASAT® Bass Tom Hamilton Signature Model (right-hand only)
Pickups: two G&L “Hamiltone” Magnetic Field Design humbuckers
Controls: G&L Tri-Tone active/passive electronics, 3-way mini-toggle pickup selector, series/parallel mini-toggle,
preamp control mini-toggle (off/on/on with high frequency EQ boost), volume, treble, bass
Neck wood: quartersawn maple with light tint satin finish
Neck profile: 1 1/2” Medium C
Radius: 12”
Body wood: Western Sugar Pine
Finish: Red, Blue, or Turquoise Metal Flake with Silver double faux binding

L-2000™
Pickups: two L-spec G&L Magnetic Field Design humbuckers
Controls: G&L Tri-Tone active/passive electronics, 3-way mini-toggle pickup selector, series/parallel mini-toggle,
preamp control mini-toggle (off/on/on with high frequency EQ boost), volume, treble, bass
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

L-2500™
Pickups: two L-spec G&L Magnetic Field Design humbuckers
Controls: G&L Tri-Tone active/passive electronics, 3-way mini-toggle pickup selector, series/parallel mini-toggle,
preamp control mini-toggle (off/on/on with high frequency EQ boost), volume, treble, bass
Neck profile: 1 3/4” Medium C 5 (no neck profile options)
Radius: 12” (no radius options)
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

M-2000™
Pickups: two M-spec G&L Magnetic Field Design humbuckers
Controls: G&L M-Series 18v active preamp with controls for pan, volume and 3-band EQ with center detents
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: Alder on standard and solid finishes, Swamp Ash on Premier finishes
Finish: Standard finishes included

M-2500™
Pickups: two M-spec G&L Magnetic Field Design humbuckers
Controls: G&L M-Series 18v active preamp with controls for pan, volume and 3-band EQ with center detents
Neck profile: 1 3/4” Medium C 5 (no neck profile options)
Radius: 12” (no radius options)
Body wood: Alder on standard and solid finishes, Swamp Ash on Premier finishes
Finish: Standard finishes included

L-1500™
Pickup: L-spec G&L Magnetic Field Design humbucker
Controls: G&L Tri-Tone active/passive electronics, series /parallel mini-toggle,
preamp control mini-toggle (off/on with high frequency EQ boost), volume, treble, bass
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

L-1505™
Pickup: L-spec G&L Magnetic Field Design humbucker
Controls: G&L Tri-Tone active/passive electronics, series /parallel mini-toggle,
preamp control mini-toggle (off/on with high frequency EQ boost), volume, treble, bass
Neck profile: 1 3/4” Medium C 5 (no neck profile options)
Radius: 12” (no radius options)
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

MJ-4™
Pickups: two G&L Bi-coil Alnico pickups
Controls: G&L MJ-Series 18v active preamp with controls for pan, volume and 3-band EQ with center detents
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

MJ-5™
Pickups: two G&L Bi-coil Alnico pickups
Controls: G&L MJ-Series 18v active preamp with controls for pan, volume and 3-band EQ with center detents
Neck profile: 1 3/4” Medium C 5 (no neck profile options)
Radius: 12” (no radius options)
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

JB™ NOW AVAILABLE LEFT HANDED
Pickup: Two G&L split-coil Alnico V
Controls: volume, volume, tone
Neck profile: 1 1/2” Medium C (no neck profile options)
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

JB-5™ NOW AVAILABLE LEFT HANDED
Pickup: Two G&L split-coil Alnico V
Controls: volume, volume, tone
Neck profile: Modern C5 (no neck profile options)
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

SB-1™
Pickup: G&L Magnetic Field Design split-coil
Controls: volume, tone
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

SB-2™ [*see note below]
Pickups: G&L Magnetic Field Design split-coil in neck position; G&L Magnetic Field Design single coil in bridge position
Controls: one volume control for each pickup, master tone
Neck profile: 1 1/2” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

*Note: G&L did not change the website spec page per the G&L Dealer Price List dated 2/1/2017.
They seem to have decided to make this spec change via a mod option (but not documented other then listing on the G&L facebook page
for those built with the"modded with tone control and side-mount jack" option).

Kiloton™
Pickup: L-spec G&L Magnetic Field Design humbucker
Controls: volume, tone, mini-toggle for series/split/parallel
Neck profile: 1 1/2” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

Kiloton 5™ (NEW model added May 9, 2017)
Photos of new Kiloton 5 bass
Pickup: L-spec G&L Magnetic Field Design humbucker
Controls: volume, tone, mini-toggle for series/split/parallel
Neck profile: G&L Modern C5
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

LB-100™
Pickup: G&L split-coil Alnico V
Controls: volume, tone
Neck profile: 1 5/8” Medium C
Radius: 9.5”
Body wood: alder on standard and solid finishes, swamp ash on Premier finishes
Finish: Standard finishes included

The G&L name, stylized G&L logo, distinctive "hook" headstock design, Tribute, Kiloton, Magnetic Field Design,
MFD and Saddle-Lock are registered trademarks or trademarks of G&L Musical Instruments / BBE Sound, Inc.

† The personal name, likeness and signature of Mr. Clarence Leo Fender are property of G&L Musical Instruments / BBE Sound, Inc.
and may not be used in any commercial capacity without prior approval. For enquiries regarding the use of the "Leo Fender" name,
likeness or signature, please contact us. G&L is not associated with Fender Musical Instruments Corporation.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List (except where noted).

Go to the http://www.glguitars.com website to see examples of these finishes.
Click on the headings to see more example photos from the factory.
Also, check G&L's Facebook page for photos of recently built instruments.

NOTE: Some model descriptions show "Standard and Premier finishes included" and
these models DO NOT require extra charge for Premier finishes.

Standard Finishes

2-Tone Sunburst
3-Tone Sunburst
Alpine White
Belair Green
Candy Apple Red Metallic
Cherryburst
Emerald Blue Metallic
Emerald Green Metallic
Fullerton Red
Graphite Metallic
Himalayan Blue
Jet Black
Lake Placid Blue Metallic
Margarita Metallic
Midnight Blue Metallic
Old School Tobacco Sunburst
Pearl White
Royal Purple Metallic
Ruby Red Metallic
Shoreline Gold
Silver Metallic
Sonic Blue
Spanish Copper Metallic
Surf Green (NEW in 8/2017)
Tangerine Metallic
Tobacco Sunburst
Vintage White
Yukon Gold Metallic

Note: Frost finish option available on all Standard finishes except Pearl White.

Premier Finishes

Blonde(*)
Butterscotch Blonde(*)
Blackburst(**)
Blueburst
Clear Blue
Clear Forest Green
Clear Orange
Clear Red
Greenburst
Honey
Honeyburst
Lemon Drop(**)
Natural
Redburst
Vintage Natural(**)
Whiskey

(*) - Available on Swamp Ash only.
(**) - Available on Swamp Ash and/or Maple Tops only.

Frost finish is available on all Premier finishes.

Metal Flake Finishes

Blue Flake
Gold Flake
Green Flake
Orange Flake
Red Flake
Silver Flake
Turquoise Flake

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Premium Flamed Maple top
Premium Quilt Maple top

Premium Quilt Maple top substitution for Premium Flame Maple top on ASAT Deluxe and ASAT Deluxe Semi-Hollow.

Blonde and Butterscotch Blonde are not available with Premium Maple Tops.

When applied to an alder body, Premium Flame or Quilt top may be ordered in any transparent Standard finish.

When applied to a Swamp Ash, Okoume, or Basswood body, Premium Flame or Quilt top may be ordered in any transparent Standard finish or
Premier finish.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Swamp Ash - for models and colors which come standard with alder, Swamp Ash may be specified.

Lightweight American Basswood - for solid colors, Lightweight American Basswood may be specified. NEW

Okoume - for models and colors which come standard with alder, Okoume may be specified. NEW

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Original Leo Spec Body Depth (1.625” mill-depth)
Now standard on all ASAT guitars and ASAT Bass.

Front Arm Contour for solid-body ASAT guitars and ASAT Bass.

Rear Contour for solid-body ASAT guitars.
NOTE: May not be combined with double binding

Body Binding

Natural Wood Binding (not available with Blackburst, Blonde, Butterscotch Blonde, Lemon Drop, Natural, Vintage Natural).

White Body Top Binding (not available with Alpine White, Blonde, Pearl White, Vintage White)

White Body Double Binding (not available with Alpine White, Blonde, Pearl White, Vintage White)

Black Body Top Binding (not available with 3-Tone Sunburst, 2-Tone Sunburst, Blackburst, Blueburst, Greenburst, Redburst, Jet Black, Tobacco Sunburst) (New-April 2017)

Black Body Double Binding (not available with 3-Tone Sunburst, 2-Tone Sunburst, Blackburst, Blueburst, Greenburst, Redburst, Jet Black, Tobacco Sunburst) (New-April 2017)

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Examples of current USA Pickguards.

1-ply Black
3-ply Black
3-ply Cream
3-ply Mint
3-ply Parchment NEW
3-ply White Pearloid
4-ply Tortoise Shell
1-ply White
3-ply White*

* 3-ply white is standard on models with pickguard.

Pickguard Delete: available for all ASAT Classic models with two pickups, ASAT Special and ASAT Special Semi-Hollow.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Legacy, Comanche and S-500 models with pickguards come standard with bell style knobs.
If no knob color option is selected, knobs will match the pickups (e.g. black pickups, black knobs).

Bell style knobs colors
Black
Mint
Parchment NEW
White

Chrome knurled knobs

Legacy, Comanche and S-500 models with pickguards may substitute chrome knurled knobs instead of standard bell style knobs.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Legacy Alnico V Single Coil

Black
Mint
Parchment NEW
White

If no pickup cover color is selected:

Legacy guitars with 3-ply white, 1-ply white or pearl pickguard will be equipped with white single-coil pickup covers.
Same for middle pickup of ASAT Classic S Alnico and ASAT Classic S Alnico Semi-Hollow.

Legacy guitars with 3-ply black, 1-ply black or tortoise pickguard will be equipped with black single-coil pickup covers.
Same for middle pickup of ASAT Classic S Alnico and ASAT Classic S Alnico Semi-Hollow.

Legacy guitars with 3-ply mint pickguard will be equipped with mint single-coil pickup covers.
Same for middle pickup of ASAT Classic S Alnico and ASAT Classic S Alnico Semi-Hollow.

S-500 Magnetic Field Design

Black
White

If no pickup cover color is selected:

S-500 guitars with 3-ply white, 1-ply white or pearl pickguard will be equipped with white pickup covers.
Same for middle pickup of ASAT Classic S and ASAT Classic S Semi-Hollow.

S-500 guitars with 3-ply black, 1-ply black, 3-ply mint, or tortoise pickguard will be equipped with black pickup covers.
Same for middle pickup of ASAT Classic S and ASAT Classic S Semi-Hollow.

Z-coil Magnetic Field Design

Black
White

If no pickup cover color is selected:

ASAT Z-3 and Comanche guitars with 3-ply white, 1-ply white or pearl pickguard will be equipped with white pickup covers.

ASAT Z-3 and Comanche guitars with 3-ply black, 1-ply black, 3-ply mint, or tortoise pickguard will be equipped with black pickup covers.

Jumbo Magnetic Field Design (ASAT Special / SC-2)

Black
Creme
White

If no pickup cover color is selected:

ASAT Special and ASAT Special Semi-Hollow guitars with 3-ply white, 1-ply white or pearl pickguard will be equipped with white pickup covers.

ASAT Special and ASAT Special Semi-Hollow guitars with 3-ply black, 1-ply black, 3-ply mint or tortoise pickguard will be equipped with black pickup covers.

SC-2 will have black covers.

P-90 (Fallout / Bluesboy 90)

Black
Creme

If no pickup cover color is selected:

Fallout and Bluesboy 90 will have black P-90 cover with any pickguard.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

G&L ALNICO NECK HUMBUCKER SUBSTITUTIONS

G&L AS4255C with chrome cover instead of G&L AS4255B black or G&L AS4255W white

G&L AS4255B black humbucker instead of AS4255W white

G&L AS4255W white humbucker instead of AS4255B black


G&L ALNICO BRIDGE HUMBUCKER SUBSTITUTIONS

G&L AW4368C with chrome cover instead of G&L AW4470B black or G&L AW4470W white

G&L AW4470B black humbucker instead of AW4470W white

G&L AW4470W white humbucker instead of AW4470B black

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

For ASAT Classic Bluesboy only: Seymour Duncan Seth Lover instead of G&L A2S4248N Alnico II magnet humbucker.
Note that these pickups are similar mid ‘50s spec with Alnico 2 magnets, 42 gauge wire with similar of turns, nickel cover, 2-conductor lead with braided ground shield.

Seymour Duncan ’59 instead of G&L AS4255B or G&L AS4255W. ’59 and G&L AS4255 are wound with 42 gauge wire with similar number of turns.

White
Black

Seymour Duncan TB-4 instead of G&L AW4470B or AW4470W.
TB-4 and G&L AW4470 are wound with 44 gauge wire with similar number of turns.

White
Black

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Single Coil Mode (SCM) for L-2000 and L-2500 basses. 2-way Series/Parallel switch is replaced with 3-way Series/Split/Parallel switch.
Pickups are specially made with individual coil leads to accommodate.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

G&L Saddle Lock substitute on guitars which come standard with G&L Dual Fulcrum Vibrato (except JC Signature)

G&L Dual Fulcrum Vibrato substitute on guitars which come standard with G&L Saddle Lock bridge (except JC Signature)

Bigsby(*) vibrato for ASAT guitars equipped standard with Saddle Lock bridge.


(*) Not available on any ASAT Classic variant. Not available with 7 ½” radius.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Guitar and Bass Neck Radius
Substitute neck profile from standard:

7 ½” This is close to the vintage 7 ¼” radius of the ‘50s and ‘60s, and feels virtually the same yet allows guitarists
just a bit more note bending before a note will “choke” or “fret out”.

9 ½” A nice mid-way point between the vintage radius and a modern 12” radius. Standard on most guitar models.

12” Flatter for deep string bends and greater ease when soloing.

BASS NECK PROFILES
Substitute neck profile from standard:

1 5/8” Medium C - 1 5/8” nut width sits right between the traditional P and J bass widths, and Leo offered this nut width in the ‘80s.
Generous edge roll with a medium depth and taper from 0.820” at 1st fret to 0.940” at 12th fret. These specs were part of the #11 and #12 necks.

1 ½” Medium C - 1 ½” nut width traditional to a J bass, Leo brought it with him to Fender Avenue for the ASAT Bass and SB-2.
1 1/2” nut width, generous edge roll, and medium taper from 0.820” at 1st fret to 0.920” at 12th fret. These specs were part of the #6 and #8 necks.

1 ¾” Medium C - 1 ¾” nut width traditional to a P bass, Leo brought it with him to Fender Avenue for the L-2000 and other models.
1 3/4” nut width, generous edge roll, medium taper from 0.820” at 1st fret to 0.940” at 12th fret. These specs were part of the #5 and #7 necks.

1 ¾” Medium C 5 - 1 ¾” nut width, generous edge roll, medium taper from 0.820” at 1st fret to 0.940” at 12th fret.
Starts out just like the 4-string 1 ¾” medium C and fans out to a wider heel. These specs were part of the #10 neck. Not available on JB-5.

1 ¾” Modern C 5 - Exclusive to the Kiloton 5 and JB-5. 1.75" nut width, generous edge roll, medium taper from 0.810" at 1st fret to 0.910" at 12th fret.

GUITAR NECK PROFILES
Substitute neck profile from standard:

Modern Classic - 1 11/16” nut width with 1 5/8” string spacing allows a generous edge roll for superb comfort without string fall-off.
Fairly slim with mild taper from 0.820” at 1st fret to 0.870” at the 12th fret.

Slim C - 1 5/8” nut width, slight edge roll, mild taper from 0.820” to 0.870”. These specs were part of the #1a neck.

Classic C - This is the profile most G&L fans associate with the post 2000 era. 1 5/8” nut width, slight edge roll, medium taper from 0.830” to 0.960”.
It starts off fairly slim and gets beefier up the neck. These specs were part of the #1 neck.

Classic Plus C - Just 1/16” wider than the Classic C with added string spacing. A good choice for players with big hands who find 1 5/8” a little too narrow.
1 11/16” nut width, slight edge roll, medium taper from 0.830” to 0.960”. It starts off fairly slim and gets beefier up the neck. These specs were part of the #3 neck.

Classic Wide C - A full 1/8” wider than the Classic C with added string spacing. The extra width is welcome not just for players with big hands,
but those who value more string spacing. 1 3/4” nut width, slight edge roll, medium taper from 0.830” to 0.960”. It starts off fairly slim and gets beefier up the neck.
These specs were part of the #4 neck.

Heritage ‘86 - Faithful to the early G&L years with a 1 5/8” nut width, slight edge roll, and medium taper from 0.790” at 1st fret to a 0.910” at 12th fret.
These specs were part of the #1b neck.

Modern U - Fans of Leo’s early U-shape necks often want a chunk down low but not too much at the top.
While some of those early U-shape necks were extremely thick, the Modern U offers a bit more chunk but not too much.
1 5/8” nut width, slight edge roll, mild taper from 0.850” at the 1st fret to 0.910” at the 12th fret. These specs were part of the #1c neck.

Soft V - A gentle V-shape is heaven for some players, and this is one will delight. Mild V-shape down low which fades to almost C-shape up top.
1 5/8” nut width, slight edge roll, mild taper from 0.830” at the 1st fret to 0.960” at the 12th fret. These specs were part of the #2a neck.

Deep V - A more aggressive V-shape for those who can’t get enough V. Pronounced V-shape down low which fades to moderate V-shape up top.
1 5/8” nut width, slight edge roll, mild taper from 0.890” at the 1st fret to 0.930” at the 12th fret. These specs were part of the #1d neck.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Quartersawn maple neck
This method of cutting the maple boards results in the endgrain being directed about 45° to 90° from the face of the fingerboard.
This cut results in a more stable neck and is recommended for players who tour as it better withstands substantial changes in temperature and humidity.

Ebony fingerboard
For guitar and bass.

Caramel Ebony fingerboard
Ebony with naturally occurring caramel color streaks and swirls.

Ebony fretless bass
Choose with or without white inlaid ghostlines.

Rosewood fretless bass
Choose with or without white inlaid ghostlines.

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Medium Jumbo Frets standard on all guitars and basses in this price list. Jescar 57110 18% Nickel Silver.

Vintage Frets for guitars. Jescar 43080 18% Nickel Silver.

Stainless Steel Medium Jumbo Frets for guitars and basses without 7 ½” radius. Jescar 57110SS.

Graph-Tech Nut for guitars and basses.

Graph-Tech String Retainer for guitars.

Locking Tuners for guitars.

Reverse Headstock for guitars and 4-string basses. No model logo will appear.

No face dots on fretboard (not listed on Price List-Order code is NTD).

[Craig]

This information is based upon the February 1, 2017 U.S. Dealer Price List.

Clear Gloss finish
Light Tint Gloss finish
Vintage Tint Gloss finish
Clear Satin finish
Light Tint Satin finish
Vintage Tint Satin finish

Painted Headstock (choose body matching or Jet Black)

Not available in Blackburst, Blonde, Butterscotch Blonde, Lemon Drop, Vintage Natural.

Black headstock automatically comes with Silver-on-Black G&L logo and Model Logo Delete.
It is strongly recommended to choose either Silver-on- Black or Black-on-Silver G&L logo and Model Logo Delete on other Painted Headstock colors.

Gloss Headstock Face (combine with standard Clear Satin neck, Light Tint Satin neck or Vintage Tint Gloss neck)

White Neck Binding
Black Neck Binding (New-April 2017)

Block Inlays for guitars and basses (New-April 2017)
Examples of Black and White pearl block inlays

Block inlays are available in black or white pearl.

Model Logo Delete

Silver-on-Black G&L logo - treble clef and border are silver. Use on dark colored headstocks.
Black-on-Silver G&L logo - treble clef and border are black. Use on light colored headstocks.

These G&L logos require Model Logo Delete.