ASAT classic replacement neck
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
ASAT classic replacement neck
Hello,
I need to replace my ASAT classic neck because the truss rod doesn't turn anymore...
I would like to know if a telecaster-like neck (standard telecaster neck) would fit my G&L body.
Sorry I can't find the answer in the G&L official website
Thank you
I need to replace my ASAT classic neck because the truss rod doesn't turn anymore...
I would like to know if a telecaster-like neck (standard telecaster neck) would fit my G&L body.
Sorry I can't find the answer in the G&L official website
Thank you
-
- Posts: 172
- Joined: Mon Mar 01, 2010 6:41 pm
Re: ASAT classic replacement neck
It's my understanding that a Fender neck will not fit the G&L's neck pocket. Your best bet is to find a used one on Ebay, or other sales venue. The 3-bolt models are slightly narrower at the heal so you'll want to match 3-bolt to 3-bolt. Otherwise, the factory will replace the neck but it might be approaching the $500 mark at this point.
Has your guitar been looked at by a professional guitar tech? Perhaps there is something that can be done with the existing truss-rod. Note: One should always loosen the truss-rod nut a bit first, before attempting to remove bow by tightening. If the trussrod nut isn't frozen, or the truss-rod broken inside the neck somewhere, I'd put a lot of effort into making that neck work. Good luck.
Has your guitar been looked at by a professional guitar tech? Perhaps there is something that can be done with the existing truss-rod. Note: One should always loosen the truss-rod nut a bit first, before attempting to remove bow by tightening. If the trussrod nut isn't frozen, or the truss-rod broken inside the neck somewhere, I'd put a lot of effort into making that neck work. Good luck.
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
thanks for your quick answer
I checked on ebay, but it's hard to find the exact model I want.
Fortunately I have a 4 bolt model.
I'm thinking about a warmoth neck, but i'm not sure it's gonna fit neither. I emailed them, now I'm waiting for an answer.
Wait and see...
And yes, a professionnel checked my guitar, he just confirmed my fears about my truss rod, which was frozen from the time I received the guitar.
(I custom ordered it, but I live in France, so maybe my asat didn't like the fly )
Unfortunately, I've tried everything with the truss rod...
I checked on ebay, but it's hard to find the exact model I want.
Fortunately I have a 4 bolt model.
I'm thinking about a warmoth neck, but i'm not sure it's gonna fit neither. I emailed them, now I'm waiting for an answer.
Wait and see...
And yes, a professionnel checked my guitar, he just confirmed my fears about my truss rod, which was frozen from the time I received the guitar.
(I custom ordered it, but I live in France, so maybe my asat didn't like the fly )
Unfortunately, I've tried everything with the truss rod...
-
- Posts: 172
- Joined: Mon Mar 01, 2010 6:41 pm
Re: ASAT classic replacement neck
How long have you had the guitar? How soon after you received the guitar did you try to adjust the truss-rod? I'm just curious. I mean, when one buys a used guitar, one usually tests the truss-rod for proper movement. However, with a new guitar, one might wait a bit longer, especially if the guitar comes nicely set up. Did you report it to G&L as soon as you ran into problems?
BTW: With the price of factory replaced necks what it is today, you'd probably be better off buying another used ASAT Classic and keep or sell the extra parts. That would get you a neck relatively quickly, and you could probably recoup a lot of the guitar's cost by selling the parts, especially in Europe, eh? You might even find you like the "parts" guitar better and decide to sell the one with the bad neck. Good luck.
BTW: With the price of factory replaced necks what it is today, you'd probably be better off buying another used ASAT Classic and keep or sell the extra parts. That would get you a neck relatively quickly, and you could probably recoup a lot of the guitar's cost by selling the parts, especially in Europe, eh? You might even find you like the "parts" guitar better and decide to sell the one with the bad neck. Good luck.
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
This was a custom ordered.
I received my guitar in november 2008, but I didn't know very much about guitar adjustments at this time...
But I was suspecting the problem from the beginning, but I wasn't sure.
I brought it to first guitar pro but he didn't see the problem but I still wasn't satisfied by my guitar settings.
To sum up, I think the problem was present from the beginning but I realized it too late...
And I didn't send the warranty card...I regret it very much...I don't know how much the neck repair will cost!!
And about your last idea, why not, but I think It's gonna be difficult to sell a G&L body, even more in Europe (because there are very few G&L guitars in europe!)
I've contacted Warmoth : their neck don't fit G&L bodies, and they won't make me a special neck...
I'm waiting musickraft and G&L answers...
I received my guitar in november 2008, but I didn't know very much about guitar adjustments at this time...
But I was suspecting the problem from the beginning, but I wasn't sure.
I brought it to first guitar pro but he didn't see the problem but I still wasn't satisfied by my guitar settings.
To sum up, I think the problem was present from the beginning but I realized it too late...
And I didn't send the warranty card...I regret it very much...I don't know how much the neck repair will cost!!
And about your last idea, why not, but I think It's gonna be difficult to sell a G&L body, even more in Europe (because there are very few G&L guitars in europe!)
I've contacted Warmoth : their neck don't fit G&L bodies, and they won't make me a special neck...
I'm waiting musickraft and G&L answers...
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: ASAT classic replacement neck
If you retained the purchase receipt for the guitar you should be okay to get this fixed under the 10 year warranty (USA models) or the 2 year warranty (Tribute models).djyne wrote:This was a custom ordered.
I received my guitar in november 2008, but I didn't know very much about guitar adjustments at this time...
But I was suspecting the problem from the beginning, but I wasn't sure.
I brought it to first guitar pro but he didn't see the problem but I still wasn't satisfied by my guitar settings.
To sum up, I think the problem was present from the beginning but I realized it too late...
And I didn't send the warranty card...I regret it very much...I don't know how much the neck repair will cost!!
And about your last idea, why not, but I think It's gonna be difficult to sell a G&L body, even more in Europe (because there are very few G&L guitars in europe!)
I've contacted Warmoth : their neck don't fit G&L bodies, and they won't make me a special neck...
I'm waiting musickraft and G&L answers...
Have you contacted the G&L Distributor for your area to make arrangements for repair? That is what G&L has listed as the procedure in their Support page on their main website.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
You think so? you would relieve me...but I only have the email receipt, and of course the serial number on my neck. With this you think it's gonna be alright?If you retained the purchase receipt for the guitar you should be okay to get this fixed under the 10 year warranty (USA models) or the 2 year warranty (Tribute models).
I custom ordered it in us 1 year and a half ago, so it should be ok.
I haven't contacted the G&L Distributor of my area because they don't distribute US G&L guitars...but maybe should I? (that's why I ordered directly from the us...)
Thanks again for your help, I don't feel alone with my problem anymore , and maybe this thread will be helpful for others
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: ASAT classic replacement neck
You should contact the G&L dealer you purchased it from and work with them to get it taken care of under warranty.djyne wrote:You think so? you would relieve me...but I only have the email receipt, and of course the serial number on my neck. With this you think it's gonna be alright?If you retained the purchase receipt for the guitar you should be okay to get this fixed under the 10 year warranty (USA models) or the 2 year warranty (Tribute models).
I custom ordered it in us 1 year and a half ago, so it should be ok.
I haven't contacted the G&L Distributor of my area because they don't distribute US G&L guitars...but maybe should I? (that's why I ordered directly from the us...)
Thanks again for your help, I don't feel alone with my problem anymore , and maybe this thread will be helpful for others
Let us know how it works out.
Hoping that it can be resolved quickly and to your satisfaction.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
I did.
Their answer :
Their answer :
I told them I didn't send back the warranty card and since no email back...Hi. If the guitar is still under warranty, you will need to contact G&L directly. We cannot provide replacement parts or repair services. Did you send in your warranty card when you got the guitar? Thanks,
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: ASAT classic replacement neck
Please send me email with the dealer's name, your contact information and I will try and help get this resolved.djyne wrote:I did.
Their answer :
I told them I didn't send back the warranty card and since no email back...Hi. If the guitar is still under warranty, you will need to contact G&L directly. We cannot provide replacement parts or repair services. Did you send in your warranty card when you got the guitar? Thanks,
My email address is craig@guitarsbyleo.com.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 172
- Joined: Mon Mar 01, 2010 6:41 pm
Re: ASAT classic replacement neck
I believe that the dealer is giving you a load of bull. Virtually every warranty card I've ever seen states that your warranty coverage is not effected by not sending it in. I suggest you look on yours to verify this. If similar verbiage is there, you might want to alert your dealer to this fact. Having a receipt to establish a date of purchase, and that you are the original owner, should be all you need for warranty coverage. I suspect that these guys just don't want to deal with it and figured that most people don't send in warranty cards. It was a convenient, and seemingly credible way of blowing you off. That's what I'd surmise anyway.djyne wrote:I did.
Their answer :
I told them I didn't send back the warranty card and since no email back...Hi. If the guitar is still under warranty, you will need to contact G&L directly. We cannot provide replacement parts or repair services. Did you send in your warranty card when you got the guitar? Thanks,
It's great that Craig is trying to get you some help with your issue. Good luck.
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
Unfortunately I don't have this card anymore...
but if I remember correctly it was specified that my warranty coverage is not effected by not sending it in.
But as I said, I do have the email with my order, I hope it will be enought to have my warranty
but if I remember correctly it was specified that my warranty coverage is not effected by not sending it in.
But as I said, I do have the email with my order, I hope it will be enought to have my warranty
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
Just to keep you informed, my neck will be replace, under warranty, thanks to Craig and Steve!! thanks to G&L!
As I said to steve, to prevent any problem, my next G&L (I want a fullerton red legacy ) will be ordered in France (but I hope there won't be any problem...)
As I said to steve, to prevent any problem, my next G&L (I want a fullerton red legacy ) will be ordered in France (but I hope there won't be any problem...)
-
- Posts: 172
- Joined: Mon Mar 01, 2010 6:41 pm
Re: ASAT classic replacement neck
Excellent. Congratulations. Those G&L folks are a pretty good bunch.djyne wrote:Just to keep you informed, my neck will be replace, under warranty, thanks to Craig and Steve!! thanks to G&L!
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
Yes they are!
I'll tell you when the guitar will be adjust with the new neck.
I'll tell you when the guitar will be adjust with the new neck.
-
- Posts: 55
- Joined: Sat Apr 24, 2010 8:29 am
Re: ASAT classic replacement neck
Hi,
ok 1 month and a half later, my guitar is adjusted!
It was no longer than Steve told me at first to build the neck, but it's ok now.
I love this guitar...especially with the new 12"radius neck!
I find it even more beautiful with the new neck...
Here's my old neck and its sick trussrod, no comment
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
And that's my axe with its new neck :
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
Very good guitar...
Thanks again to you for helping
ok 1 month and a half later, my guitar is adjusted!
It was no longer than Steve told me at first to build the neck, but it's ok now.
I love this guitar...especially with the new 12"radius neck!
I find it even more beautiful with the new neck...
Here's my old neck and its sick trussrod, no comment
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
And that's my axe with its new neck :
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
http://www3.snapfish.fr/snapfishfr/slid ... =SPIClink/
Very good guitar...
Thanks again to you for helping
Last edited by djyne on Fri Jun 11, 2010 3:24 pm, edited 1 time in total.
-
- Posts: 8
- Joined: Fri Jun 11, 2010 4:30 am
Re: ASAT classic replacement neck
Hoping to get the same sort of service here,
Congrats on the new gat
Congrats on the new gat