Replacement knobs for ASAT Classic Three?

The place to discuss, post photos, video, and audio of the G&L products (US instruments, stomp boxes, etc.) produced after 1991, including the amps & gear we use with them.
User avatar
charleyrich
Posts: 61
Joined: Sat Nov 26, 2011 2:38 pm

Replacement knobs for ASAT Classic Three?

Post by charleyrich »

Where can I get replacement knobs for an ASAT Classic Three?

I am looking for something similar to the stock knobs, but with the addition of a position mark on the top. I know I can use the screw for this purpose but it is hard to see the screw after it turns near the bottom of the guitar.

Recommendations for replacement knobs or a website where they have them?

Thanks,

Charley
------------------------------------------
Charley Rich
charley.rich@gmail.com
https://www.youtube.com/user/charleyrich
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Replacement knobs for ASAT Classic Three?

Post by Craig »

charleyrich wrote:Where can I get replacement knobs for an ASAT Classic Three?

I am looking for something similar to the stock knobs, but with the addition of a position mark on the top. I know I can use the screw for this purpose but it is hard to see the screw after it turns near the bottom of the guitar.

Recommendations for replacement knobs or a website where they have them?

Thanks,

Charley
Check out the CLF Reearch Bass knob on the G&L On-Line Store, here is the link: Knob_CLF_Research_Bass
They are 20mm in diameter with set screw and position marker. They are used on the CLF Research guitar and bass models.

Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
charleyrich
Posts: 61
Joined: Sat Nov 26, 2011 2:38 pm

Re: Replacement knobs for ASAT Classic Three?

Post by charleyrich »

Thank you.

Are they the same size as the stock knobs?
------------------------------------------
Charley Rich
charley.rich@gmail.com
https://www.youtube.com/user/charleyrich
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Replacement knobs for ASAT Classic Three?

Post by Craig »

charleyrich wrote:Thank you.

Are they the same size as the stock knobs?
They may be 2mm larger in diameter. Can you measure yours? I measured my ASAT Semi-hollow knobs and they measure 18mm diameter.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options