The guitar is a Fullerton Standard Legacy in Graphite Metallic. I measured the dc resistance of each stock CLF-100 pickup while removed from the guitar with probes attached to clean lead wire free of solder. I keep track of such things for my gear and thought it would be good to share here for reference.
Neck pickup (white/black cloth leads) 6.00 k
Middle pickup (yellow/red cloth leads) 6.01 k
Bridge pickup (yellow/blue cloth leads) 6.81 k
Measured the DC of the CLF-100s in my 2018 Legacy
-
TwangBanger
- Posts: 15
- Joined: Fri Oct 09, 2020 5:48 am
-
Craig
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Measured the DC of the CLF-100s in my 2018 Legacy
Thanks for sharing this as it is inline with the change made to the bridge pickup winding done in 2017, see CLF-100 pups.TwangBanger wrote:The guitar is a Fullerton Standard Legacy in Graphite Metallic. I measured the dc resistance of each stock CLF-100 pickup while removed from the guitar with probes attached to clean lead wire free of solder. I keep track of such things for my gear and thought it would be good to share here for reference.
Neck pickup (white/black cloth leads) 6.00 k
Middle pickup (yellow/red cloth leads) 6.01 k
Bridge pickup (yellow/blue cloth leads) 6.81 k
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
TwangBanger
- Posts: 15
- Joined: Fri Oct 09, 2020 5:48 am
Re: Measured the DC of the CLF-100s in my 2018 Legacy
More documented spec info is always good.
FWIW the CLF-100s were removed because I replaced them with a set with staggered pole pieces based on personal preference. My Legacy (2018 Fullerton Standard) has a 9.5" fretboard radius so can get along with either flat or staggered pickups depending on taste.
I also previously installed an Expander Switch a la S-500 and Comanche using the same Alco switch often seen from G&L.
FWIW the CLF-100s were removed because I replaced them with a set with staggered pole pieces based on personal preference. My Legacy (2018 Fullerton Standard) has a 9.5" fretboard radius so can get along with either flat or staggered pickups depending on taste.
I also previously installed an Expander Switch a la S-500 and Comanche using the same Alco switch often seen from G&L.