Hey everyone,
I'm new around here, and looking to buy my first G&L.
I had my eye on a Tribute Legacy, but then I noticed the "Special Edition" versions in black and white, which are $150 cheaper. I can't seem to find much information on them though. As far as I can tell, they're identical aside from the fact that the bodies are basswood (instead of ash in the "standard" version), and they don't seem to use the CLF-100 pickups. All the descriptions I've seen say something like "G&L-designed single-coil Alnico V," but they don't say much more than that.
I was hoping folks here might have some more details. Does anyone know how they sound compared to the CLF-100 equipped "standard" Tribute Legacy? Is it worth spending the extra $150 for the real-deal pickups and ash body?
Thanks!
"Special Edition" Tribute Legacy pickups?
-
- Posts: 3
- Joined: Wed Jul 15, 2020 9:48 am
-
- Site Admin
- Posts: 11352
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: "Special Edition" Tribute Legacy pickups?
Yes, the Tribute MF/GC Limited Edition Legacy single coil pickups are wound at the Cort facility in Indonesia to G&L specifications of the CLF-100 pickups.OneRoomStudios wrote:Hey everyone,
I'm new around here, and looking to buy my first G&L.
I had my eye on a Tribute Legacy, but then I noticed the "Special Edition" versions in black and white, which are $150 cheaper. I can't seem to find much information on them though. As far as I can tell, they're identical aside from the fact that the bodies are basswood (instead of ash in the "standard" version), and they don't seem to use the CLF-100 pickups. All the descriptions I've seen say something like "G&L-designed single-coil Alnico V," but they don't say much more than that.
I was hoping folks here might have some more details. Does anyone know how they sound compared to the CLF-100 equipped "standard" Tribute Legacy? Is it worth spending the extra $150 for the real-deal pickups and ash body?
Thanks!
Also, the Tribute MF/GC Limited Edition Legacy HSS's humbucker bridge pickup is wound at the Cort facility in Indonesia to G&L specifications of the G&L AW4370B humbucker.
See these posts in our Knowledgebase: 2015-present MF/GC Exclusive Tribute Models and List of pickups used in G&L guitars.
When the MF/GC Tributes first came out, I talked with Paul Gagon about those pickups being built to G&L specifications and he said the Cort facility pickups were equal to the CLF-100
made at the G&L Fullerton factory.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 3
- Joined: Wed Jul 15, 2020 9:48 am
Re: "Special Edition" Tribute Legacy pickups?
It does immensely, thanks!
One more related question - do you happen to know if standard "strat" pickup covers fit over these or US-made CLF-100 pickups? If not, do you know where I could find cream/parchment colored pickup covers that would fit? Thanks again!
One more related question - do you happen to know if standard "strat" pickup covers fit over these or US-made CLF-100 pickups? If not, do you know where I could find cream/parchment colored pickup covers that would fit? Thanks again!
-
- Site Admin
- Posts: 11352
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: "Special Edition" Tribute Legacy pickups?
OneRoomStudios wrote:It does immensely, thanks!
One more related question - do you happen to know if standard "strat" pickup covers fit over these or US-made CLF-100 pickups? If not, do you know where I could find cream/parchment colored pickup covers that would fit? Thanks again!
Yes, I believe they do.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options