ASAT Tribute goes sharp
-
- Posts: 4
- Joined: Mon May 17, 2010 12:50 pm
ASAT Tribute goes sharp
I have an ASAT Tribute. At the first position fretted notes, especially the G string, go noticeably sharp. For instance, if I play an E cord at the first position, the cord will sound a little out of tune. Intonation improves up the neck and is fine at the 12th fret. Is there anything I can do about this?
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Re: ASAT Tribute goes sharp
Does the action seem too high at the nut?
It could be that the G-string slot needs to be carefully deepened with a nut file.
Is the G string seated completely in the slot? If the slot wasn't cut wide enough for the string gauge you are using this would cause it to ride a little high and cause the sharp notes you are experiencing.
I would suspect the problem to be at the nut if chords sound right higher up the neck.
Can you post a picture of the action at the nut or measure it with feeler gauge?
It could be that the G-string slot needs to be carefully deepened with a nut file.
Is the G string seated completely in the slot? If the slot wasn't cut wide enough for the string gauge you are using this would cause it to ride a little high and cause the sharp notes you are experiencing.
I would suspect the problem to be at the nut if chords sound right higher up the neck.
Can you post a picture of the action at the nut or measure it with feeler gauge?
-
- Posts: 4
- Joined: Mon May 17, 2010 12:50 pm
Re: ASAT Tribute goes sharp
Thanks, for the reply. I will check it out with a feeler gauge this evening after I get home from work and let you know tomorrow.
Norm
Norm
-
- Posts: 4
- Joined: Mon May 17, 2010 12:50 pm
Re: ASAT Tribute goes sharp
I checked the string clearaance over the first fret and found it to be .043" (1.08mm). The strings are all properly in their slots. I keep the slots in the nut cleaned and lubricated. All of the strings will go sharp when fretted at the first fret, though the G seems worse than the others.
Norm
Norm
-
- Posts: 2498
- Joined: Tue Feb 09, 2010 2:00 am
- Location: Canada's Mexico
Re: ASAT Tribute goes sharp
In the setup instructions it specifies .018" as the recommended spacing above the first fret.
It sounds like you could safely deepen the slots ( or have a luthier do it if you don't have nut files).
http://www.guitarsbyleo.com/GALLERY2/ma ... itemId=366
It sounds like you could safely deepen the slots ( or have a luthier do it if you don't have nut files).
http://www.guitarsbyleo.com/GALLERY2/ma ... itemId=366
-
- Posts: 4
- Joined: Mon May 17, 2010 12:50 pm
Re: ASAT Tribute goes sharp
I'll do that. Thanks for your help.
Norm
Norm
-
- Posts: 27
- Joined: Sat Mar 06, 2010 1:52 pm
Re: ASAT Tribute goes sharp
The same happened to my Tribute S-500. A luthier refiled the slots and the situation improved a lot. But, don´t expect perfect pitch at every fret and every string with a normal nut.