Asat Special Tribute string question

The place to discuss, post photos, video, and audio of the G&L Tribute Series instruments, including the amps & gear we use with them.
radiomanjh
Posts: 5
Joined: Fri Apr 03, 2015 1:57 pm

Asat Special Tribute string question

Post by radiomanjh »

I just received my new Asat today and wanted to know if the strings that come with it are D'Addario 9-42 and is it ok to put 10-46 on it without a truss rod adjustment? Also was I supposed to get anything else with the guitar other than a warranty registration card? thanks for any info
User avatar
john o
Posts: 982
Joined: Sun Apr 20, 2014 3:52 am
Location: Delaware

Re: Asat Special Tribute string question

Post by john o »

i prefer 10-46 as well, and strung mine up with no problems. go for it!
i have made 2 minor adjustments (45 degrees or an 1/8th turn each) to truss rod thus far, with good results.
john o
User avatar
Craig
Site Admin
Posts: 11352
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Asat Special Tribute string question

Post by Craig »

radiomanjh wrote:I just received my new Asat today and wanted to know if the strings that come with it are D'Addario 9-42 and is it ok to put 10-46 on it without a truss rod adjustment? Also was I supposed to get anything else with the guitar other than a warranty registration card? thanks for any info
see this post in the G&L Knowledgebase: What gauge & brand of strings does G&L use on their guitars?.

I think they still come with the set of allen wrenches. If they didn't come with them, check with the selling dealer.

Hope this helps.

:geek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
john o
Posts: 982
Joined: Sun Apr 20, 2014 3:52 am
Location: Delaware

Re: Asat Special Tribute string question

Post by john o »

radiomanjh wrote:I just received my new Asat today and wanted to know if the strings that come with it are D'Addario 9-42 and is it ok to put 10-46 on it without a truss rod adjustment? Also was I supposed to get anything else with the guitar other than a warranty registration card? thanks for any info
you should get a little plastic bag with hex wrenches for the truss rod, the MFD pickup pole pieces, and the bridge saddles. also check to see that you have the saddle lock bridge screw, mine came without that
john o
radiomanjh
Posts: 5
Joined: Fri Apr 03, 2015 1:57 pm

Re: Asat Special Tribute string question

Post by radiomanjh »

thanks for the info!
radiomanjh
Posts: 5
Joined: Fri Apr 03, 2015 1:57 pm

Re: Asat Special Tribute string question

Post by radiomanjh »

drjho7 wrote:
radiomanjh wrote:I just received my new Asat today and wanted to know if the strings that come with it are D'Addario 9-42 and is it ok to put 10-46 on it without a truss rod adjustment? Also was I supposed to get anything else with the guitar other than a warranty registration card? thanks for any info
you should get a little plastic bag with hex wrenches for the truss rod, the MFD pickup pole pieces, and the bridge saddles. also check to see that you have the saddle lock bridge screw, mine came without that
hi drjho7, yes after I looked again I did find the little bag with the hex wrenches and no saddle lock bridge screw either. I was worried a little about how much the guitar would weigh after I had read that a lot of them were pretty heavy but mine isn't too bad at 9.2 lbs.
radiomanjh
Posts: 5
Joined: Fri Apr 03, 2015 1:57 pm

Re: Asat Special Tribute string question

Post by radiomanjh »

Craig wrote:
radiomanjh wrote:I just received my new Asat today and wanted to know if the strings that come with it are D'Addario 9-42 and is it ok to put 10-46 on it without a truss rod adjustment? Also was I supposed to get anything else with the guitar other than a warranty registration card? thanks for any info
see this post in the G&L Knowledgebase: What gauge & brand of strings does G&L use on their guitars?.

I think they still come with the set of allen wrenches. If they didn't come with them, check with the selling dealer.

Hope this helps.

:geek:
found the wrenches, thanks craig