Inside Leo's Lab photos from G&L's Facebook page ...

The place to discuss, post photos, video, and audio of the G&L instruments produced from 1980 to 1991, including the amps & gear we use with them.
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

George Fullerton, Leo Fender, Dale Hyatt.
Image
Inside Leo's Lab: the chair where the magic happened for decades.
Image
Showing some magazine guys around G&L this morning and thought I'd share this little historical bit from Leo's desk. When Forrest White and
Tom Walker wanted to start a new business in the early '70s, they called it Tri-Sonix. Of course they needed Leo's support. Leo didn't like that
name and suggested (demanded?) the business be named Music Man. - Dave
Image

June 1983: one of Leo's carts holding new G&L guitars and basses. We still use this cart today. This photo is stored in Leo Fender's office.
Image
Inside Leo's Lab: "Apache" name on a sample neck dated 1983. It could be this was leading to the Comanche years later. Only Leo knows.
Image
On board Leo's yacht: the helm of Aquafen IV. This is among the hundreds of photos he kept in his office.
Image
Inside Leo's Lab: his notes listing parts to make a Magnetic Field Design (MFD) pickup. The history in here is amazing.
Image
1950s Leo Fender: on top of the world, with many more great things ahead.
Image
Leo Fender featured in the History of Orange County exhibit at John Wayne Airport.
From Fender to G&L, Leo's work forever changed music and the world we live in.
Image
Leo Fender styling mockup of early G&L guitar concept. Some elements of this mockup suggest to us
that this may have been made in '78 or '79, while this place was still CLF Research, before Leo introduced G&L.
Note the early development of the G&L trademark hook design in the headstock, at this point no more than a bump.
The hook design wasn't used on the early G&L instruments; the completed hook design appeared
in production a few years later.
Image
Image
Inside Leo's office: early '70s photo showing construction of the Fender Avenue buildings developed by Leo.
This is where he operated CLF Research until he turned it into G&L.
Image
It's August of 1976 and Music Man production is in full swing at CLF (Clarence Leo Fender) Research,
four years before production of Stingrays and Sabres would give way to L-1000s and L-2000s. In this shot,
pickup bobbins are being assembled using little fixtures Leo designed. To this day, G&L uses the same kind of fixtures,
most of which are still the same ones Leo left us. - Dave
Image
Leo went through several pickup concepts before settling on the humbucking pickup for the Stingray and Sabre basses.
It was just like Leo to push things, to try the unexpected. How about one single-coil pickup per string? There's one way to find out.
Though this photo is over 35 years old, this prototype pickup arrangement remains in Leo's lab today. - Dave
Image
The year is 1976. Leo has expanded the CLF Research facility on Fender Avenue to begin producing guitars and basses.
The names on them are MusicMan. It would be another four years before G&L instruments would be made here.
Let's have a look under the hood of those early years, starting with the woodshop. In this photo George Fullerton is with
Lloyd Chewning, the plant foreman. The first time I met Lloyd he had a stroke, right there in front of me, and passed away. - Dave
Image
Here's a shot of the Fender Avenue buildings once they were completed and tenants were moving in.
That's Leo's white Cadillac. He always had white cars because he thought they were safer.
Easier to see at night, he said. He also encouraged employees to have white cars, too. - Dave
Image
I think this would have been shot sometime in 1970 as the Fender Avenue buildings were under construction.
Leo built these as income properties to lease out, but he kept a few units for his CLF Research operation.
CLF stands for Clarence Leo Fender. - Dave
Image
Here's an interesting moment in time with guitar industry titans and sometime rivals. On the left is Les Paul, in the middle is Leo Fender,
and the man on the right, well, I'm not sure but I've got a hunch he's either Norton Stevens or Maurice Berlin. At the time of this photo,
I believe it's 1977, Gibson was owned by Norlin, the name made up of "Nor" from Norton and "lin" from Berlin. - Dave
Image
Inside Leo's Lab: body template for the last instrument he made, a baritone guitar prototype.
Image
Late '70s to early '80s: bass neck templates for Music Man, G&L (no hook), G&L (with hook). EvoLEOtion.
Image
Inside Leo's lab: an early prototype Magnetic Field Design bass humbucker. Note the MusicMan cover with ears. We think Leo built this in '78.
Image
Inside Leo's Lab: double neck, dual six string. Each side has one split coil pickup installed but clearly accommodates two pickups per side.
24-fret necks have dual truss rods but not tilt-back headstocks, attached with raw, unplated and unmarked 3-bolt neck plates in the Fender/G&L style.
The ends of the headstocks are sanded to alter the shape, as they probably came from a manufacturer other than Fender.
We think it was a concept explored in the early '70s when Leo started CLF Research. CLF later became G&L.
Image
Inside Leo's office: from the mid '70s CLF Research years, a styling mockup of a Music Man bass. By this time Leo had the body profile,
headstock and bridge footprint nearing the final form.
Image
Inside Leo's Lab: the evolution of the split pickup concept continued through the '70s at CLF Research, culminating in the
G&L Magnetic Field Design Z-coil. The history in this place runs deep.
Image
Inside Leo's Office: Leo loved photography and left us hundreds of photos from across his career.
In this photo from February 1951 we see amp chassis production.
Image
Inside Leo's Lab: Pickup development was constantly under way.
Image
Inside Leo's Lab: sketches for 5-string bass pickups. The Z-coil offset concept was used on the L-5000 of the late '80s.
The side-by-side coil concept is used on the recent MJ-4. Many of you have asked us about making a five string MJ-5.
Well, it's a great idea Leo started, so we're going to finish it.
Image
At the NAMM show in the mid '80s. This photo is on the wall outside Leo's lab.
Image
Inside Leo's lab: his moisture meter used to check the water content of wood. A few notes of his appear in the upper left hand corner of the yellow manual.
Image
Inside Leo's Office: a man who works six or seven days a week always keeps a razor handy.
Leo has a few around here, including this 1960s Sunbeam Shavemaster.
Image
Inside Leo's Lab: Fender Electric XII, possibly an old development mule just hanging around.
Whenever we look at this, we think about possibilities. What do you think?
Image
Inside Leo's office: Leo Fender, President. Spiritually, he still is.
Image
Inside Leo's lab: concept 5-string bass headstock dated August 18, 1986.
Image
Inside Leo's lab: his Interstate log-linear sweep generator. It remains operational.
Image
The man we thank every day for his gifts to the music world.
Image
Last edited by Craig on Mon Oct 12, 2015 8:31 pm, edited 5 times in total.
Reason: Replaced photos with local copies, since facebook photo links seem to disappear over time.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
Katefan
Posts: 501
Joined: Fri May 07, 2010 2:34 pm
Location: Boca Raton

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Katefan »

Cheers Craig - much appreciated!

KF
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

Katefan wrote:Cheers Craig - much appreciated!

KF
You're welcome! I also added a few more I just found and updated the post.
I will add to it as more surface.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
GentlemanJim
Posts: 109
Joined: Thu Feb 24, 2011 7:10 pm
Location: Evergreen, Al

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by GentlemanJim »

Wow, fantastic pic's. Thanks
User avatar
sam
Posts: 1970
Joined: Sat Feb 20, 2010 9:38 am

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by sam »

Thanks Craig! :D

This is incredible history of an amazing man. I will surely spend much time re-reading this post.

I can see a z-coil 12 string brewing somewhere.
Cya,
Sam
Fumble fingers
Posts: 2153
Joined: Fri Feb 15, 2013 12:11 pm
Location: Dayton , Ohio

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Fumble fingers »

and a big secret let out early ..... MJ 5 in the works
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

Fumble fingers wrote:and a big secret let out early ..... MJ 5 in the works
Nah, I posted this in August: 2014 G&L U.S. Specifications and Options.
Look at the spec listings. Can you find the other new model? :?:

And, then followed up with this post in December: Factory photo of the new MJ-5 bass.

:roll: :lol:

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Fumble fingers
Posts: 2153
Joined: Fri Feb 15, 2013 12:11 pm
Location: Dayton , Ohio

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Fumble fingers »

I was so taken away with the quilted top I didn't pay attention too the 5 string :crazy:
User avatar
KenC
Posts: 2344
Joined: Thu Feb 17, 2011 7:18 pm
Location: None of the above

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by KenC »

Craig,

Thanks for posting. This is great stuff. Is that another hint at a G&L baritone???

Ken
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

KenC wrote:Craig,

Thanks for posting. This is great stuff. Is that another hint at a G&L baritone???

Ken
No, not really. I just found that template photo on G&L's Instagram site and added it.
I had hope to talk with Dave at NAMM about the baritone/6-string bass, but since
they did not have a booth this year, I ended up staying home.

Dean and I will likely make a trip down there some time soon this year, so I will talk
with Dave about it then.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
yowhatsshakin
Posts: 3340
Joined: Tue Feb 09, 2010 8:00 am
Location: Seattle

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by yowhatsshakin »

Thanks Craig, This is the stuff I am craving for.

- Jos
Christian
Posts: 2
Joined: Mon Mar 30, 2015 1:14 pm

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Christian »

Hi Craig,

Wondering if you have a contact at G&L? I'd like to visit the factory and see Leo's lab.

Also, I hope it's alright if I attempt to share my direct e-mail address --
christian (DOT) patterson (AT) gmail (DOT) com

Thanks!

Christian
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

Christian wrote:Hi Craig,

Wondering if you have a contact at G&L? I'd like to visit the factory and see Leo's lab.

Also, I hope it's alright if I attempt to share my direct e-mail address --
christian (DOT) patterson (AT) gmail (DOT) com

Thanks!

Christian
G&L does not offer public factory tours. See this post in the Knowledgebase: G&L Factory Tour.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Christian
Posts: 2
Joined: Mon Mar 30, 2015 1:14 pm

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Christian »

To explain a bit further, I'm not looking for a public tour. I have an art/film-related project in mind. I was just put in touch with Dave M., a VP at G&L, so I'm hoping that might lead somewhere...
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Craig »

Christian wrote:To explain a bit further, I'm not looking for a public tour. I have an art/film-related project in mind. I was just put in touch with Dave M., a VP at G&L, so I'm hoping that might lead somewhere...
I'm sure that is Dave McLaren and he is President of G&L. He will take care of you.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
JimmyJames
Posts: 80
Joined: Thu Sep 03, 2015 4:01 pm

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by JimmyJames »

AMAZING!
Tomas83
Posts: 133
Joined: Tue Aug 11, 2015 5:55 pm
Location: NE corner of the 4 corners

Re: Inside Leo's Lab photos from G&L's Facebook page ...

Post by Tomas83 »

Thanks Craig. Amazing stuff!
the simpler, the better...
CMG Ashlee
Agile Hawker 727
BluGuitar Amp1 ME