L-2000 "Passive" Bass

General Questions
kingman
Posts: 1
Joined: Mon Apr 05, 2010 2:11 pm

L-2000 "Passive" Bass

Post by kingman »

Have what believe to be is an original G&L L-2000 with the 3 switch controls. Problem is the active/passive PCB is missing as well as most of the necesary wiring. The active/passive switch has 2 cut wires; looks like they were a yellow and a white. There's also a black wire currently connected to the "bass" knob.

Pictures are available at http://s750.photobucket.com/home/kingman_666

Done some investigative work on my L-2000, and here's what I've come up with so far:

1. based on the date written in the neck cavity and stamped on the neck, believe the bass was built either Jan or Jun 1980
2. the following information is written in pencil in the neck cavity:
- XP.1-13-80
- Test Body KeiF (?)
3. the following information is stamped on the neck tail:
- the number 3
- Jan (or Jun) 18, 1980
4. written in pencil on the neck tail is L-1000
5. no other information is contained on the body or neck other than the G&L label on the head stock
6. the "mysterious hole" in the control plate appears to have contained another switch of some kind

Contacted G&L with this info, but no "old timers around" to concur, dispute, or provide anything additional. Also, they don't have the "old-style" active/passive electronics only the new style which is $150. I'd rather restore this bass back to original, but have been unlucky so far in tracking down the right parts. So again I ask anyone out there who may have a lead to getting the right active/passive components.

Have posted the following pictures on photobucket under kingman_666:

control plate front
control plate rear
control cavity
neck cavity
neck tail
body
neck
2 Ad pictures

NOTE: In Ad "A", the pickups are located closer to the neck and the control plate has a smooth inside curve. In Ad "B", the pickups are closer to the bridge, and the control plate has two "protrusions" on the inside curve. Based on this info, my bass matches the "A" picture so the control plate is probably the correct type.
spideyjg
Posts: 5
Joined: Sun Feb 28, 2010 11:03 am

Re: L-2000 "Passive" Bass

Post by spideyjg »

For reference on BABP we have been going over this in depth..

http://badassbassplayers.com/forum/view ... 53&t=14117

http://badassbassplayers.com/forum/view ... 48&t=14132

Short of the ad this is the first example that has ever surfaced.

http://s750.photobucket.com/home/kingman_666

Image

Jim