1996 ASAT, looking for more info

The place to discuss, post photos, video, and audio of the G&L products (US instruments, stomp boxes, etc.) produced after 1991, including the amps & gear we use with them.
newasatowner
Posts: 2
Joined: Mon Feb 08, 2016 2:27 pm

1996 ASAT, looking for more info

Post by newasatowner »

Hi all,

I recently acquired a black ASAT, serial number G046930. The neck has a production stamp from Feb 22nd, 1996. I thought it was a Special because of the MFDs, but as opposed to the ASATs I've seen so far, this one sports black tuners and black hardware, (including the saddle lock bridge). The neck is quite slim tapered, slimmer than I expected from a Tele style guitar and feels rather delicate. Measurements show a nut width of 1 5/8" and a radius of about 9". And it is quite heavy. From the old 1996/97 catalogue (page 2) I can see that there were ASATs and ASAT Specials, the former having the black hardware as opposed to the chrome appearance of the latter. Does anyone know if there are any significant differences other than this, which strikes me as purely cosmetic?

I was also wondering if anyone has more insight into construction details like the neck shape and thickness, the nut material (can't decide whether it's bone or plastic, it sure doesn't smell...), the bridge material (is it zinc? the scraped off part of the bottom for the ground connection sure seems to suggest that it is...) and what sort of wood was used. The neck is a maple/rosewood but because of the weight I'm not too sure about the body, it would definitely b too heavy for swamp ash.

Many thanks in advance for the info, it is greatly appreciated!
Greetings from Germany! :wave:
User avatar
KenC
Posts: 2344
Joined: Thu Feb 17, 2011 7:18 pm
Location: None of the above

Re: 1996 ASAT, looking for more info

Post by KenC »

Welcome! The only differences between ASATs and ASAT Specials were the plating on the hardware. It was a gradual progression away from the black hardware of the Leo-era. Otherwise, they are the same instrument.

The neck profile you described is normal for older G&Ls. I need to jump off the computer right now, but I will finish the post later tonight.

Ken
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: 1996 ASAT, looking for more info

Post by Craig »

newasatowner wrote:Hi all,

I recently acquired a black ASAT, serial number G046930. The neck has a production stamp from Feb 22nd, 1996. I thought it was a Special because of the MFDs, but as opposed to the ASATs I've seen so far, this one sports black tuners and black hardware, (including the saddle lock bridge). The neck is quite slim tapered, slimmer than I expected from a Tele style guitar and feels rather delicate. Measurements show a nut width of 1 5/8" and a radius of about 9". And it is quite heavy. From the old 1996/97 catalogue (page 2) I can see that there were ASATs and ASAT Specials, the former having the black hardware as opposed to the chrome appearance of the latter. Does anyone know if there are any significant differences other than this, which strikes me as purely cosmetic?

I was also wondering if anyone has more insight into construction details like the neck shape and thickness, the nut material (can't decide whether it's bone or plastic, it sure doesn't smell...), the bridge material (is it zinc? the scraped off part of the bottom for the ground connection sure seems to suggest that it is...) and what sort of wood was used. The neck is a maple/rosewood but because of the weight I'm not too sure about the body, it would definitely b too heavy for swamp ash.

Many thanks in advance for the info, it is greatly appreciated!
Greetings from Germany! :wave:
See these posts for some info here:

List of Regular Production ASAT-style guitars (USA)
What are the USA neck size options, past and present?
Re: Nut Material ?
Production List of G&L Instruments (USA)
List of pickups used in G&L guitars
pre-BBE ASAT vs. '07 ASAT Special: Differences



Hope this helps.

And please post photos of your ASAT (We love to see photos and it does not exist without them. ;) )

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
newasatowner
Posts: 2
Joined: Mon Feb 08, 2016 2:27 pm

newasatowner

Post by newasatowner »

Hi,

Thx for your help, those links are really useful. Apparently the body wood is alder, from the links provided. The neck shape / profile is just slightly unusual, it reminds me of Ibanez Wizard necks but must have been popular in the 90s. What about the bridge material? New USA models seem to have brass bridges, but the underside where the finish is scratched off to provide ground wire contact seems to suggest zinc...

Again, thx for your help. Pics will follow...

Cheers
Markus
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: newasatowner

Post by Craig »

newasatowner wrote:Hi,

Thx for your help, those links are really useful. Apparently the body wood is alder, from the links provided. The neck shape / profile is just slightly unusual, it reminds me of Ibanez Wizard necks but must have been popular in the 90s. What about the bridge material? New USA models seem to have brass bridges, but the underside where the finish is scratched off to provide ground wire contact seems to suggest zinc...

Again, thx for your help. Pics will follow...

Cheers
Markus
See these posts: Older USA Saddle Lock Bridge Die Cast? and pre-BBE ASAT vs. '07 ASAT Special: Differences.
Hope this helps.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options