Where's the best/quickest place to get a set screw for a saddle lock bridge.
(I could actually use 2)
and do they have any kind of pad at the end...
Thanks...Chris
Set screw for Saddle lock Bridge
-
- Posts: 101
- Joined: Fri Mar 05, 2010 1:32 am
- Location: Dixon Ca, (Near UC Davis)
-
- Posts: 8
- Joined: Sat May 01, 2010 4:43 pm
- Location: RI
Re: Set screw for Saddle lock Bridge
You can pickup a setscrew at a hardware store. I'm not sure but I think it's #8-32. You can also pick up the correct one with the nylon pad at the on-line store at the G&L website.
99 Legacy Special, 03 ASAT Special Deluxe, #120 25th Anniversary, 83? L1000, ?? Legacy HB
-
- Posts: 101
- Joined: Fri Mar 05, 2010 1:32 am
- Location: Dixon Ca, (Near UC Davis)
Re: Set screw for Saddle lock Bridge
Got it.... Thanks...
Sounds much better
Sounds much better
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Set screw for Saddle lock Bridge
There are 2 different thread configurations: For US instruments 2005 and older, use part # 080215-000 (Standard), for US instruments 2006 and later and all Tribute instruments use part # 080215-100 (Metric) [from the G&L on-line store].chuck0765 wrote:You can pickup a setscrew at a hardware store. I'm not sure but I think it's #8-32. You can also pick up the correct one with the nylon pad at the on-line store at the G&L website.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 101
- Joined: Fri Mar 05, 2010 1:32 am
- Location: Dixon Ca, (Near UC Davis)
Re: Set screw for Saddle lock Bridge
Hi Craig,
Thanks for the response, that is helpful. I went to the hardware store and got
a couple but I kinda like having the original stuff so I'll be ordering the parts as soon
as I can set my new WR down long enought.. (for those keeping track.. that's Two WR's
Sparkle Silver and Sparkle Turquoise)
Thanks for the response, that is helpful. I went to the hardware store and got
a couple but I kinda like having the original stuff so I'll be ordering the parts as soon
as I can set my new WR down long enought.. (for those keeping track.. that's Two WR's
Sparkle Silver and Sparkle Turquoise)
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Set screw for Saddle lock Bridge
Glad I was helpfulChrisPcritter wrote:Hi Craig,
Thanks for the response, that is helpful. I went to the hardware store and got
a couple but I kinda like having the original stuff so I'll be ordering the parts as soon
as I can set my new WR down long enought.. (for those keeping track.. that's Two WR's
Sparkle Silver and Sparkle Turquoise)
I think you also need a WR in Orange Metal Flake, too.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 101
- Joined: Fri Mar 05, 2010 1:32 am
- Location: Dixon Ca, (Near UC Davis)
Re: Set screw for Saddle lock Bridge
I was actually just thinking that....
My wife was just thinking of how to make it look like an
accident so the insurance will still pay..
My wife was just thinking of how to make it look like an
accident so the insurance will still pay..
-
- Posts: 785
- Joined: Wed May 26, 2010 11:44 am
- Location: England
Re: Set screw for Saddle lock Bridge
They do ORANGE now? WR's?? Oh God.... what an unbearably tempting perfect piece of genius that is...
P.S. about the saddle-lock setscrew: does anyone feel that the saddles can be made to sit up at slight angles if they're not laid out flat (not level, obviously, just not angled), i.e. they can rock under pressure of the setscrew and actually end up making for worse mechanical stability? Mine does seem to sound a bit different (better) with each saddle parallel to the baseplate and then tightened so the rubber tip compresses quite a bit but not massively tight.
P.S. about the saddle-lock setscrew: does anyone feel that the saddles can be made to sit up at slight angles if they're not laid out flat (not level, obviously, just not angled), i.e. they can rock under pressure of the setscrew and actually end up making for worse mechanical stability? Mine does seem to sound a bit different (better) with each saddle parallel to the baseplate and then tightened so the rubber tip compresses quite a bit but not massively tight.