No! It isn't an 1982 SC-2!

The place to discuss, post photos, video, and audio of the G&L instruments produced from 1980 to 1991, including the amps & gear we use with them.
User avatar
yowhatsshakin
Posts: 3340
Joined: Tue Feb 09, 2010 8:00 am
Location: Seattle

No! It isn't an 1982 SC-2!

Post by yowhatsshakin »

On this forum, there are some other posts on instruments and parts of ill repute currently offered in certain marketplaces.

Here's another one.

Things that are wrong:
  • Although the neck definitely is from a pre-BBE SC-2 given the absence of the G&L hook, it is mounted as a 4-bolt to the body.
  • All 1982 SC-2's have a maple body
  • They also were available in only a handful of colors (black, red, white, and blue);
  • They have black crinkle powder-coated hardware
  • They come in a very simple hard-shell case, not a deluxe G&G HSC. And certainly not in a modern Fender-case which is recognizable from the tapered accessory compartment.
Be careful out there. You have to read the title and description very carefully to notice that they correctly claim it is a patched together instrument. I initially misread it for one. But I find it misleading nonetheless. Calling it an ASAT Special with swapped out SC-2 neck would be more accurate than the others way around as it is.

- Jos
Last edited by yowhatsshakin on Thu Feb 26, 2015 8:33 pm, edited 1 time in total.
User avatar
jeffmarshall67
Posts: 241
Joined: Sat May 11, 2013 8:22 pm
Location: Near Seattle, WA

Re: No! It isn't an 1982 SC-2!

Post by jeffmarshall67 »

Thanks Jos, that post is informative and educating!
User avatar
KenC
Posts: 2344
Joined: Thu Feb 17, 2011 7:18 pm
Location: None of the above

Re: No! It isn't an 1982 SC-2!

Post by KenC »

I'm not sure what the original listing was, but now it's "G&L SC-2 Vintage 1982 Neck W/custom G&L ASAT Special Ash Body All USA Parts". I agree that listing it as an SC-2 would be very misleading, especially to a buyer who has not done their research on early G&L models.

On a different point, another SC-2 bites the dust...

Ken
User avatar
yowhatsshakin
Posts: 3340
Joined: Tue Feb 09, 2010 8:00 am
Location: Seattle

Re: No! It isn't an 1982 SC-2!

Post by yowhatsshakin »

KenC wrote:I'm not sure what the original listing was, but now it's "G&L SC-2 Vintage 1982 Neck W/custom G&L ASAT Special Ash Body All USA Parts". I agree that listing it as an SC-2 would be very misleading, especially to a buyer who has not done their research on early G&L models.

On a different point, another SC-2 bites the dust...

Ken
I don't think the title of the listing ever changed; I just initially misread it. It's just too easy to stop reading after "SC-2" only to realize that's not the full story by a long shot. I also realize now there would be another problem with this instrument: it does not have a serial number. There isn't one on the neck because the S/N would be on the bridge for a pre-BBE SC-2, and isn't one on the 4-bolt neck plate even if it wasn't a "custom" plate. So noone would even be able to put this "mongel" in the Registry ;-)

And yes, where did that neck come from? Surplus? Parted out SC-2 (shudder)?

- Jos
User avatar
glvourot
Posts: 631
Joined: Thu Dec 09, 2010 11:15 am
Location: British Columbia

Re: No! It isn't an 1982 SC-2!

Post by glvourot »

I read somewhere that total pre BBE G&L production was only 28,000 instruments . Then I'm sure the percentage of SC-2's would be much less than that. If one was parted out that really hurts.
Paul
User avatar
KenC
Posts: 2344
Joined: Thu Feb 17, 2011 7:18 pm
Location: None of the above

Re: No! It isn't an 1982 SC-2!

Post by KenC »

glvourot wrote:I read somewhere that total pre BBE G&L production was only 28,000 instruments . Then I'm sure the percentage of SC-2's would be much less than that. If one was parted out that really hurts.
There were about 600 first style SC-2s (with the Mustang-ish body), and not a whole lot of the second style before they gave way to the Broadcaster. It is a shame to see any of them ruined.

Ken