January 15-21, 2015 Factory Photos ...

[Craig]

Here's an ASAT Classic Alnico in Sonic Blue, 1-ply white guard, rosewood board, Clear Satin neck finish.
CLF072573 is headed to John's Music in Hilton Head, South Carolina.

Here's an S-500 in Fullerton Red, 3-ply mint guard, white covers and knobs, rosewood board, #3 neck profile with Vintage Tint Gloss finish.
CLF072576 is headed to The Guitar Store in Seattle, Washington. This sexy S-500 is for Arnold Schmidt.

Here's an ASAT Classic in Vintage White, 1-ply black guard, maple neck with Vintage Tint Gloss finish. CLF072281

Here's an ASAT Classic in Clear Orange over swamp ash, 3-ply creme guard, maple neck with Clear Satin finish.
CLF072580 is headed to Musician's Friend.

Here's an ASAT Classic Bluesboy in Blonde over Empress, 3-ply white guard, maple neck with Clear Satin finish. We built this
to just because we wanted to see this piece of Empress under Blonde. It turned out very nice and super light at just 6.6 lbs.
We're finished geeking out over CLF072597 so now it's available for a G&L dealer to order.

Here's an ASAT Special Deluxe in Blackburst over flame maple, wood binding (special exception with Blackburst),
matching headstock, ebony board, Clear Satin neck finish. CLF072591 is headed to MusicStoreLive.com.

Here's an ASAT Classic Alnico in Belair Green, double bound, 3-ply white guard, maple neck with Light Tint Gloss finish.
CLF072556 is headed to Maple Leaf Music Co. in Brattleboro, Vermont.

Here's an ASAT Classic Bluesboy in Blonde over swamp ash, tortoise guard, rosewood board, Clear Satin neck finish.
CLF072588 is headed to Musician's Friend.

Here's an ASAT Classic Bluesboy in 3-Tone Sunburst over Empress, 3-ply mint guard, rosewood board, Clear Satin neck finish.
It came out awesome and it's only 6.6 lbs. We're finished geeking out over CLF072593 and now it's headed to
BCR Music & Sound in Lemoyne, Pennsylvania.

Here's a Legacy HB in 3-Tone Sunburst over swamp ash, tortoise guard, black Seymour Duncan TB-4 and single coil covers,
quartersawn maple neck with locking tuners, Light Tint Satin finish and matching headstock.
CLF072561 is headed to Alvis Music & Sound in Vincennes, Indiana.

Here's an ASAT Classic S Alnico in Clear Orange over swamp ash, front and back contours, 3-ply creme guard,
black middle cover, maple neck with locking tuners, matching headstock and Vintage Tint Gloss finish. CLF071647

Here's an Invader XL in Midnight Blue Metallic, Floyd Rose, matching headstock, quartersawn maple neck with stainless steel frets and
Clear Satin neck finish. CLF072583 is headed to Musik Wein - Guitars in Germany.

Here's an L-2000 in Tobacco Sunburst over swamp ash, rosewood board, Clear Satin neck finish.
CLF072600 is headed to Musician's Friend.

Here's an ASAT Deluxe Semi-Hollow in Honeyburst over flame maple on mahogany, wood binding, rosewood board, Clear Satin neck finish.
CLF072595 is headed to UpFront Guitars in Franklin, Massachusetts.

Here's an ASAT Z-3 Semi-Hollow in Butterscotch Blonde over swamp ash, Dual Fulcrum vibrato, 3-ply black guard, black covers,
quartersawn maple neck with Graph-Tech nut, locking tuners and Light Tint Gloss finish. CLF072644 is headed to
Performance Music Center in Woburn, Massachusetts.

[darwinohm]

If I were looking I would be all over the Blonde Empress Bluesboy at 6.6 lbs. -- Darwin

[y2kc]

Craig,

The Fullerton Red S-500 with a #3 neck is my pick out of this bunch. Arnold is a lucky man.

Great stuff,

y2kc

[Shabbir65]

Hi Craig,

I'm a new member here and I have ordered a lefty G&L Legacy a while ago, in fact, I do expect it soon.

Anyway, I was wondering if you post pictures of all completed G&L's in these compilations or only a selected number, as I have not seen mine yet and I am anxiously looking for it

Thanks,

Shabbir

[Craig]

Hi Craig,

I'm a new member here and I have ordered a lefty G&L Legacy a while ago, in fact, I do expect it soon.

Anyway, I was wondering if you post pictures of all completed G&L's in these compilations or only a selected number, as I have not seen mine yet and I am anxiously looking for it

Thanks,

Shabbir

The G&L factory does not take photos of all the instruments they build. The ones they post on their Facebook page are where I get the photos I post here.
I do try to get them all posted, but in a collection, usually over a week or two period. You might want to check their Facebook daily instead of waiting for my
posts.

[Shabbir65]

Ahhh I see! Okay haha I'll give that a go.

Thanks for the response,

Shabbir