Just got my first G&L on Saturday (legacy content)

The place to introduce yourself to the other members here.
joeismyname
Posts: 4
Joined: Mon May 10, 2010 3:20 pm

Just got my first G&L on Saturday (legacy content)

Post by joeismyname »

My belair green G&L Legacy USA, it's serial number is CLF31315, so I believe it is from late 2003 or sometime in 2004, I'm too nervous to take the neck off and look.......been strat shopping and saw this behind the counter at a Mom & Pop guitar store in rural Virginia while visiting my parents, asked if I could play it and it played as well if not better than the $2000 custom shop fenders at my local store in Kentucky, and it was less than half the price. I had to have it.

Image

sounds like a dream with a Tiny Terror and 1X12
User avatar
MrRoundel
Posts: 172
Joined: Mon Mar 01, 2010 6:41 pm

Re: Just got my first G&L on Saturday (legacy content)

Post by MrRoundel »

Welcome. That's a nice lookin' Legacy. It sounds like it lives up to its looks too.
What you said about the G&L sounding as good as the Fender Custom Shop offerings seems to be a very widely held opinion. Without a doubt, there's value in these here axes.
If I were you, I wouldn't bother taking off the neck. If it were a more vintage guitar, then perhaps it would be a nice thing for posterity. However, it's less than 10 years old, and you aren't comfortable with taking off the neck, don't bother. It's not difficult; you just have to be careful. Did you check the Registry? Perhaps it's there and the previous owner had removed the neck for dates. You certainly want to keep the neck removals to a minimum, IMHO. Good luck.
joeismyname
Posts: 4
Joined: Mon May 10, 2010 3:20 pm

Re: Just got my first G&L on Saturday (legacy content)

Post by joeismyname »

I actually put it in the registry, just without a date. it wasn't in there yet.
User avatar
Muleya
Posts: 334
Joined: Mon Mar 15, 2010 11:08 am

Re: Just got my first G&L on Saturday (legacy content)

Post by Muleya »

Great looking guitar, and a great find!

I was nervous about taking the neck off mine when I got it, too. But to be honest, it wasn't a big deal at all, I was just careful to tighten the screws down evenly when I put it back on.