My new ASAT Classic Alnico --- some info (and some questions
-
- Posts: 4
- Joined: Thu Mar 07, 2013 7:24 pm
- Location: Pittsburgh, PA
My new ASAT Classic Alnico --- some info (and some questions
Hello . . . some time lurker, first time poster . . .
I recently got my hands on a new ASAT Classic Alnico, and thought I'd share a bit . . . but I also have some questions . . .
For those interested, I opened her up to get an accurate measurement of the pickups:
neck = 7.28k
bridge = 7.25k
Now, does anyone know any of the other specific build details on these pickups beyond the fact that they are alnico V and are the work of Steve Grom? I was wondering if anyone might know about Steve's choice of wire, potting, etc.
The guitar is alder bodied and weighs in at 7 lbs. 15 oz. The color is Fullerton Red.
And this plek'ed neck is amazing---every note everywhere on this neck rings out clearly. The neck is also satin finished and amazingly slick.
It's been a while since I've owned a guitar with an untinted neck finish. Does G&L's clear satin have a tendency to 'yellow'. Years ago I had an American Standard Strat with a satin clear finish that ambered in about a year . . .
It sounds quite snappy, clear, and balanced in all positions.
Here's a picture . . .
I recently got my hands on a new ASAT Classic Alnico, and thought I'd share a bit . . . but I also have some questions . . .
For those interested, I opened her up to get an accurate measurement of the pickups:
neck = 7.28k
bridge = 7.25k
Now, does anyone know any of the other specific build details on these pickups beyond the fact that they are alnico V and are the work of Steve Grom? I was wondering if anyone might know about Steve's choice of wire, potting, etc.
The guitar is alder bodied and weighs in at 7 lbs. 15 oz. The color is Fullerton Red.
And this plek'ed neck is amazing---every note everywhere on this neck rings out clearly. The neck is also satin finished and amazingly slick.
It's been a while since I've owned a guitar with an untinted neck finish. Does G&L's clear satin have a tendency to 'yellow'. Years ago I had an American Standard Strat with a satin clear finish that ambered in about a year . . .
It sounds quite snappy, clear, and balanced in all positions.
Here's a picture . . .
-
- Posts: 2153
- Joined: Fri Feb 15, 2013 12:11 pm
- Location: Dayton , Ohio
Re: My new ASAT Classic Alnico --- some info (and some quest
what a beauty !! ... fullerton red is sweet ...... does that have the arm contour and rear contour ??
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: My new ASAT Classic Alnico --- some info (and some quest
Actually, Paul Gagon was the one who spec'd these pickups from Leo's original design. See the Overview section of the ASAT® Classic Alnico page on G&L's main website for details. Steve Grom was the Director of Manufacturing when this guitarKissTone wrote:Hello . . . some time lurker, first time poster . . .
I recently got my hands on a new ASAT Classic Alnico, and thought I'd share a bit . . . but I also have some questions . . .
For those interested, I opened her up to get an accurate measurement of the pickups:
neck = 7.28k
bridge = 7.25k
Now, does anyone know any of the other specific build details on these pickups beyond the fact that they are alnico V and are the work of Steve Grom? I was wondering if anyone might know about Steve's choice of wire, potting, etc.
The guitar is alder bodied and weighs in at 7 lbs. 15 oz. The color is Fullerton Red.
And this plek'ed neck is amazing---every note everywhere on this neck rings out clearly. The neck is also satin finished and amazingly slick.
It's been a while since I've owned a guitar with an untinted neck finish. Does G&L's clear satin have a tendency to 'yellow'. Years ago I had an American Standard Strat with a satin clear finish that ambered in about a year . . .
It sounds quite snappy, clear, and balanced in all positions.
Here's a picture . . .
was built. In the near future I will be contacting Paul to get details on the various new pickups and wirings of the new models and will ask him about this models as well.
G&L's satin finished necks will age over time but I'm not sure how long it takes before you see a change.
Did you get a chance to A/B this model with the ASAT Classic model (with MFD pickups)?
Thanks for sharing you new G&L, it's a beauty!
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 2390
- Joined: Sat Apr 03, 2010 5:45 am
- Location: Central Highlands, Australia
Re: My new ASAT Classic Alnico --- some info (and some quest
Welcome aboard KissTone. That is a gorgeous ASAT. And is that a brown case? Is that the standard colour case for the Alnico model? It looks good.
The neck will darken over time. The neck on my '97 Classic (3rd from the left) has darkened over the years. I bought it used in 2010, so don't know whether it was stored in the sun or whether the previous owner kept it in a smoky room, but its not as stark white as a brand new one. The two necks on the left in the photo are GOT and a light tint on the far right.
The neck will darken over time. The neck on my '97 Classic (3rd from the left) has darkened over the years. I bought it used in 2010, so don't know whether it was stored in the sun or whether the previous owner kept it in a smoky room, but its not as stark white as a brand new one. The two necks on the left in the photo are GOT and a light tint on the far right.
-Jamie
-
- Posts: 300
- Joined: Tue Feb 19, 2013 3:36 am
- Location: belgium
Re: My new ASAT Classic Alnico --- some info (and some quest
Hooooo !!! Look at that lollipop !!... Wonderful ! Congrats she's gorgeous...
-
- Posts: 4
- Joined: Thu Mar 07, 2013 7:24 pm
- Location: Pittsburgh, PA
Re: My new ASAT Classic Alnico --- some info (and some quest
Thanks for the feedback, folks.
As to your questions . . .
No, there are no additional contours---just the traditional 'T' type body shape (but I will say that the generous G&L edge radius on the body is more forgiving than Fender's).
I'm afraid I didn't get a chance to play an ASAT Classic, Deluxe, or Special before going with this Alnico. A buddy has a really nice Bluesboy which is what convinced me to get my first G&L.
And yes, that case is dark brown with black ends and a black interior.
As to your questions . . .
No, there are no additional contours---just the traditional 'T' type body shape (but I will say that the generous G&L edge radius on the body is more forgiving than Fender's).
I'm afraid I didn't get a chance to play an ASAT Classic, Deluxe, or Special before going with this Alnico. A buddy has a really nice Bluesboy which is what convinced me to get my first G&L.
And yes, that case is dark brown with black ends and a black interior.
-
- Posts: 1632
- Joined: Sat Jan 07, 2012 11:46 pm
- Location: Grayslake, IL
Re: My new ASAT Classic Alnico --- some info (and some quest
Who holds that position presently?Craig wrote: Steve Grom was the Director of Manufacturing when this guitar
was built.
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: My new ASAT Classic Alnico --- some info (and some quest
I think it is still Steve, but the spec sheets are signed by the shop foreman nowadays. Pleae correct me if I'm wrong.
- Jos
- Jos
-
- Posts: 4
- Joined: Thu Mar 07, 2013 7:24 pm
- Location: Pittsburgh, PA
Re: My new ASAT Classic Alnico --- some info (and some quest
Steve's signature is on my spec sheet. It's dated August 2012.
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: My new ASAT Classic Alnico --- some info (and some quest
remember the dc resistance measurement tells you only one thing. the length of wire.
-
- Posts: 4
- Joined: Thu Mar 07, 2013 7:24 pm
- Location: Pittsburgh, PA
Re: My new ASAT Classic Alnico --- some info (and some quest
True, but I was just passing along the info for anyone interested in those types of specs.louis cyfer wrote:remember the dc resistance measurement tells you only one thing. the length of wire.
-
- Posts: 1632
- Joined: Sat Jan 07, 2012 11:46 pm
- Location: Grayslake, IL
Re: My new ASAT Classic Alnico --- some info (and some quest
Spencer Brown took over Steve Grom's duties effective December of last year. Is that whose signature you have Jos?yowhatsshakin wrote:I think it is still Steve, but the spec sheets are signed by the shop foreman nowadays. Pleae correct me if I'm wrong.
- Jos
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: My new ASAT Classic Alnico --- some info (and some quest
Actually no, or more precisely not yet. I recall seeing a spec sheet in an eBay auction and being surprised not to see Steve Grom's signature at the bottom. I talked with James of the Seattle Guitar shop a coupe of days ago and finally was able to confirm that Steve was no longer at G&L, although still having an advisory role. Could have checked his LinkedIn profile though to learn quicker ...JagInTheBag wrote:Spencer Brown took over Steve Grom's duties effective December of last year. Is that whose signature you have Jos?yowhatsshakin wrote:I think it is still Steve, but the spec sheets are signed by the shop foreman nowadays. Pleae correct me if I'm wrong.
- Jos
- Jos
-
- Posts: 1632
- Joined: Sat Jan 07, 2012 11:46 pm
- Location: Grayslake, IL
Re: My new ASAT Classic Alnico --- some info (and some quest
yowhatsshakin wrote: Could have checked his LinkedIn profile though to learn quicker ...
- Jos
Yeah, he has three LinkedIn profiles. One says he still works at G&L, one says he ended his employ December of 2012, one even says he still works at Fender.
Glad to hear there is a smooth transisition. Someone needs to help Spencer with those TPS reports...
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: My new ASAT Classic Alnico --- some info (and some quest
That would be Paul Gagon (VP Engineering BBE/G&L). Spencer Brown is the General Foreman andJagInTheBag wrote:Who holds that position presently?Craig wrote: Steve Grom was the Director of Manufacturing when this guitar
was built.
he reports directly to Paul.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options