I thought I might put this drawing up. I figured out how to install one of the Ilitch noiseless coils (same as the Suhr guitars use) in the swimming pool route but still use the stock RWRP G&L Legacy pickups. The system only uses the Ilitch coil when on the 1-3-5 settings. On 2-4 settings, the coil is disabled and the regular RWRP cancellation occurs. When the 3 setting is used the coil is "flipped" for the middle pickup. All pretty cool ... and it works ... so for reference:
Just a picture taken during installation ... again the coil fits in the swimming pool route per the photo above.
Adding Ilitch Coil to G&L Legacy ... noise is gone.
-
- Posts: 8
- Joined: Sun Mar 14, 2010 4:56 pm
-
- Posts: 1632
- Joined: Sat Jan 07, 2012 11:46 pm
- Location: Grayslake, IL
-
- Posts: 8
- Joined: Sun Mar 14, 2010 4:56 pm
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
Thanks ... I had an error in the wiring sketch ... forgot to update it here ... so thanks for the reminder.
Also ... I loaded some low wind David Allen pickups and tried it with the Ilitch coil. Completely noiseless too. The wiring is identical for the stock G&L Legacy pickups. Here's a youtube clip:
[youtube]xgtnMUeXKK4[/youtube]
I like 'em ... especially with the G&L PTB wiring.
Also ... I loaded some low wind David Allen pickups and tried it with the Ilitch coil. Completely noiseless too. The wiring is identical for the stock G&L Legacy pickups. Here's a youtube clip:
[youtube]xgtnMUeXKK4[/youtube]
I like 'em ... especially with the G&L PTB wiring.
Last edited by doveman on Sun Dec 30, 2012 11:37 am, edited 1 time in total.
-
- Posts: 3340
- Joined: Tue Feb 09, 2010 8:00 am
- Location: Seattle
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
Tasty licks doveman, tasty licks ....
Sounds great!
- Jos
Sounds great!
- Jos
-
- Posts: 8
- Joined: Sun Mar 14, 2010 4:56 pm
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
Thanks for the comments
-
- Posts: 3011
- Joined: Tue Oct 25, 2011 2:58 pm
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
sounds very nice. i love those dallen bigcats i have the prototype of those.
-
- Posts: 12
- Joined: Fri Sep 30, 2011 2:17 pm
- Location: Bucks County PA, USA
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
I have no doubt it works well, but am I the only one who find the device very elaborate and expensive considering the simple job it does? Then again, maybe it's just me, getting irritated over yet another pricey "boutique" product....
-
- Posts: 8
- Joined: Sun Mar 14, 2010 4:56 pm
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
Just a better tool ... less $ than all the noiseless pickups I've bought in total but I like it. No biggie ... just sharing.editorjuno wrote:I have no doubt it works well, but am I the only one who find the device very elaborate and expensive considering the simple job it does? Then again, maybe it's just me, getting irritated over yet another pricey "boutique" product....
-
- Posts: 12
- Joined: Fri Sep 30, 2011 2:17 pm
- Location: Bucks County PA, USA
Re: Adding Ilitch Coil to G&L Legacy ... noise is gone.
Understood -- and I agree that many of the noiseless pickups on the market are are also very "boutique"-pricey (imo Kinman and Barden being major offenders in that respect), especially given the trial and error process involved in finding a set you really like. Peace!