Dimensions of F100 pickups

[blargfromouterspace]

Anyone know these? Or could measure one and let me know? Thanks!

[Elwood]

Apologies for not getting back soon,
a snack after work and I fell asleep...today is F***ed up for me . If noone else has posted specs for you
I can get to it tonight (PST US).

best regards,Elwood

[KenC]

Original or reissue models? Or are they the same?

Ken

[blargfromouterspace]

Thanks guys. No rush at all Elwood.

Ken - the reissue ones, I'm not sure if they're same? Its in anticipation of swapping the one that will be in the LE-2 for a Filtertron

[Elwood]

Thanks guys. No rush at all Elwood.

Ken - the reissue ones, I'm not sure if they're same? Its in anticipation of swapping the one that will be in the LE-2 for a Filtertron

I only have old ones...I bet they are the same but who knows (Craig?).
I'm home tonight so I can get to it with bright eyes .

I've thought about applying at TV Jones pickups, I gotta go take a little tour of the place sometime.
I'm putting some cheap mid 90's gretsch pups in a 72 SG , I need to get back on that project.

hopefully someone with a new F-100 will chime in too.

elwood

[KenC]

I only have old ones...

Same here. FWIW, the bridge pup in my '80 F-100 measures approximately 3 1/2" by 1 3/8" (or 90mm by 35 mm). The neck pup seems to be the same, but has less spread between the pole pieces. Those estimates were made with the pup in the guitar, so they aren't exact. The corners have a very gentle radius, so I had to eyeball the endpoints.

Ken

[blargfromouterspace]

I only have old ones...

Same here. FWIW, the bridge pup in my '80 F-100 measures approximately 3 1/2" by 1 3/8" (or 90mm by 35 mm). The neck pup seems to be the same, but has less spread between the pole pieces. Those estimates were made with the pup in the guitar, so they aren't exact. The corners have a very gentle radius, so I had to eyeball the endpoints.

Ken

Thanks for that Ken, I appreciate it. Unfortunately that f's up my plan to simply drop a Filtertron (71mm x 35mm) in there without a mounting ring

I've thought about applying at TV Jones pickups....

Do it! Then hook me up with some cheapies

[gitman001]

Hey Jamie,

I just measured the reissue ones from my 25th anniversary and i got 3 3/8 x 1 3/8.
Scott

[blargfromouterspace]

Thanks Scott.