S/N CLF47557, 3-color sunburst alder body with a 2007 date, maple neck.
I replaced most of the screws since they were rusty. I think black screws look great with a black pickguard. I managed to scrape most of the rust off the bridge pickup polepieces. The bridge is still a mess, some of the saddles have grooves that are off center, and many of the screws are rusty and should be replaced. I'm trying to decide whether to order a saddle set now, or wait and get the DFS upgrade kit when or if it becomes available.
I am not sure what to make out of the neck. The neck joint has no date stamp, but there's "studio 6" in pencil and "Comanche TGN" in ink. The neck is huge, which is fine since I have big hands, but the neck profile doesn't seem to match any currently available option. Nut width is 1.670, 1st fret depth is .935, and 12th fret depth is 1.020. The shape is like a U, and the frets are tall and wide, true Jumbo size. The truss rod nut takes a 1/8" hex wrench which is odd since a 2007 guitar should have a 4 mm nut.
). It's nice to see
