JB-2 with a truss rod problem
-
- Posts: 3
- Joined: Thu Mar 01, 2012 11:52 am
JB-2 with a truss rod problem
I purchased a used JB-2 last week. It is approx. 10 years old and it looks like it was NEVER used. Serial number CLF23733. The case included the Certificate of Authenticity and the warranty registration that was never filled out. Pretty much brand new and not abused in anyway. I took it to my guitar tech for a set up and look over. He says the truss rod in the neck is faulty (not damaged). He says it cant be tightened anymore so he cant get the neck totally straight. He advised me to check with G & L about replacement necks and maybe they would be accommodating in someway since it seems to be a design flaw? Thanks in advance for any advice.
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: JB-2 with a truss rod problem
Check out these posts: Truss Rod Nut Issue and Truss rod doesn't workwishiwasabeatle wrote:I purchased a used JB-2 last week. It is approx. 10 years old and it looks like it was NEVER used. Serial number CLF23733. The case included the Certificate of Authenticity and the warranty registration that was never filled out. Pretty much brand new and not abused in anyway. I took it to my guitar tech for a set up and look over. He says the truss rod in the neck is faulty (not damaged). He says it cant be tightened anymore so he cant get the neck totally straight. He advised me to check with G & L about replacement necks and maybe they would be accommodating in someway since it seems to be a design flaw? Thanks in advance for any advice.
If these posts don't help, you might contact Chris Robosan at repairs@glguitars.com and ask him what he
suggests to fix this.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 3
- Joined: Thu Mar 01, 2012 11:52 am
Re: JB-2 with a truss rod problem
Thanks Craig. I described the fix to my tech and he said that could do it. Taking it to him tomorrow morn and I will report back. Many thanks for your quick reply.
-
- Posts: 3
- Joined: Thu Mar 01, 2012 11:52 am
Re: JB-2 with a truss rod problem
My tech tried the fix described fin the links you gave me and it didnt work. Truss rod wont go any further and the neck has too much relief still. I will send Chris at G&L an email and see what happens. Thank you for your help.