Hi everyone!
I'm new to the board and have been a huge G&L fan for many years now. I am the proud owner of the G&L GbL LE #10 and an acid green Legacy HB called the "Green Machine".
Question: Does anyone happen to have the schematic for the GbL LE? If not, do you know where I may find it. I had a guy wire my mini toggle to be a cut off switch( dumb move!) a few years ago and I would like to wire it back to the original schematic.
Thanks for your help in advance.
David
GbL LE schematic
-
sirmyghin
- Posts: 1516
- Joined: Wed Apr 28, 2010 4:30 pm
- Location: Ontario,Canada
Re: GbL LE schematic
I don't know for sure, but was the switch the 'expander' added neck and bridge to the positions it was not on the 5 way switch? If so it is a really easy switch to mod. You just have a toggle that connects the neck and bridge positions on the 5 way switch. So 2 jumpers (one from neck, one from bridge) on opposite sides of a DPDT switch, top lugs a jumper across, bottom lugs open.
-
Craig
- Site Admin
- Posts: 11350
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: GbL LE schematic
Yes, it is the expander switch, and what sirmyghin says is correct. Take a look at the S-500 photo diagram.sirmyghin wrote:I don't know for sure, but was the switch the 'expander' added neck and bridge to the positions it was not on the 5 way switch? If so it is a really easy switch to mod. You just have a toggle that connects the neck and bridge positions on the 5 way switch. So 2 jumpers (one from neck, one from bridge) on opposite sides of a DPDT switch, top lugs a jumper across, bottom lugs open.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
Dshore
- Posts: 2
- Joined: Wed Mar 30, 2011 6:34 pm
Re: GbL LE schematic
Perfect! Thanks for the help guys!
-
sirmyghin
- Posts: 1516
- Joined: Wed Apr 28, 2010 4:30 pm
- Location: Ontario,Canada
Re: GbL LE schematic
Except G&L did the wiring a lot simpler, you only need a Single pole for it, well that is why they are professionals and I am a hobbyist.Craig wrote:Yes, it is the expander switch, and what sirmyghin says is correct. Take a look at the S-500 photo diagram.sirmyghin wrote:I don't know for sure, but was the switch the 'expander' added neck and bridge to the positions it was not on the 5 way switch? If so it is a really easy switch to mod. You just have a toggle that connects the neck and bridge positions on the 5 way switch. So 2 jumpers (one from neck, one from bridge) on opposite sides of a DPDT switch, top lugs a jumper across, bottom lugs open.
Hope this helps.