hay just picked up a new G&L ASAT Tribute Classic LE Alnico in Sonic Blue. It was so good i forgot of check any specifications and walked out of the store happy. now looking for this specific model's specifications ? The G&L site does not have this listed anymore. its a Limited Edition , which comes in Sonic Blue not the natural .
Body Wood : Swamp ash , Basswood or Poplar. Andertons website says its Poplar...
Neck Radius : 9 or 9.5 ? coz the USA made Alnico ASAT Classic is a 9.5..
Recommended String Gauge?
Pickups : same as the USA made ones like the MFD or it is G&L Designed but indonesia made...
i get it ... it sounds awesome and feels perfect, so why should i even care... just curious to know more about it to gloat a little more
thanks for such an awesome instrument G&L..
Regards
Ganesh Krish
Specification Req
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Specification Req
I recently heard that Andertons was a G&L dealer/distributor and that they were going to have some Limited Edition Tributes like Musicians Friend/Guitar Center.ganeshkrish0212 wrote:hay just picked up a new G&L ASAT Tribute Classic LE Alnico in Sonic Blue. It was so good i forgot of check any specifications and walked out of the store happy. now looking for this specific model's specifications ? The G&L site does not have this listed anymore. its a Limited Edition , which comes in Sonic Blue not the natural .
Body Wood : Swamp ash , Basswood or Poplar. Andertons website says its Poplar...
Neck Radius : 9 or 9.5 ? coz the USA made Alnico ASAT Classic is a 9.5..
Recommended String Gauge?
Pickups : same as the USA made ones like the MFD or it is G&L Designed but indonesia made...
i get it ... it sounds awesome and feels perfect, so why should i even care... just curious to know more about it to gloat a little more
thanks for such an awesome instrument G&L..
Regards
Ganesh Krish
So if the model name is ASAT Tribute Classic LE Alnico then the specs will likely be:
Body wood Basswood
Neck wood Hard Rock Maple
Neck dimensions 1 5⁄8” width at nut, 9” radius
Pickups 2 G&L designed Alnico V single-coils (pickups are made by Cort to G&L's specifications)
Controls 3-way pickup selector, volume, tone
Bridge Traditional boxed steel bridge with six brass saddles
String gauge is a set of 10s.
(reference post: 2015-present MF/GC Exclusive Tribute Models)
Please post photos of your guitar so I can confirm the model. Also, can you post the dealer's webpage for this model, too.
G&L does not list Tribute Limited Editions on the main website. I created the reference post above because MF/GC has in the past posted incorrect specs
for the LE models they carry.
I am going out of town starting tomorrow for atleast 10 days, so I may not be able to follow up right away.
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 7
- Joined: Mon Jul 16, 2018 12:35 am
Re: Specification Req
https://www.andertons.co.uk/guitar-dept ... -fretboard
thanks for the quick reply craig.. looking forward to you confirming these specs. other websites like MF/GC dont have these listed. Andertons does. they have even made an excellent video about this guitar https://www.youtube.com/watch?v=UOJJA56QhOc
where they talk about the specs too.. Any clue on how many of these were made too, if possible? hope this helps..
Regards
Ganesh Krish
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Specification Req
I got confirmation from one of my G&L contacts:ganeshkrish0212 wrote:
https://www.andertons.co.uk/guitar-dept ... -fretboard
thanks for the quick reply craig.. looking forward to you confirming these specs. other websites like MF/GC dont have these listed. Andertons does. they have even made an excellent video about this guitar https://www.youtube.com/watch?v=UOJJA56QhOc
where they talk about the specs too.. Any clue on how many of these were made too, if possible? hope this helps..
Regards
Ganesh Krish
So, here are the specs for your guitar:Those are Poplar.
We also offered these in the US and other markets. It's a version of the ones we sell exclusive to MF.
Body wood Poplar
Neck wood Hard Rock Maple
Neck dimensions 1 5⁄8” width at nut, 9” radius
Pickups 2 G&L designed Alnico V single-coils (pickups are made by Cort to G&L's specifications)
Controls 3-way pickup selector, volume, tone
Bridge Traditional boxed steel bridge with six brass saddles
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 7
- Joined: Mon Jul 16, 2018 12:35 am
Re: Specification Req
thanks a lot for confirming those specifications Craig. in love with the guitar and would also like to thank Tone Shop Guitars Dallas, TX (who are G&L dealers) for keeping them in stock ..literally took me 20 guitars to find this one, They are awesome, be it customer service or set-up. They took their time in making sure i get what i want and working according to my budget.Craig wrote:I got confirmation from one of my G&L contacts:ganeshkrish0212 wrote:
https://www.andertons.co.uk/guitar-dept ... -fretboard
thanks for the quick reply craig.. looking forward to you confirming these specs. other websites like MF/GC dont have these listed. Andertons does. they have even made an excellent video about this guitar https://www.youtube.com/watch?v=UOJJA56QhOc
where they talk about the specs too.. Any clue on how many of these were made too, if possible? hope this helps..
Regards
Ganesh Krish
So, here are the specs for your guitar:Those are Poplar.
We also offered these in the US and other markets. It's a version of the ones we sell exclusive to MF.
Body wood Poplar
Neck wood Hard Rock Maple
Neck dimensions 1 5⁄8” width at nut, 9” radius
Pickups 2 G&L designed Alnico V single-coils (pickups are made by Cort to G&L's specifications)
Controls 3-way pickup selector, volume, tone
Bridge Traditional boxed steel bridge with six brass saddles
Hope this helps.
Regards
Ganesh Krish
-
- Posts: 635
- Joined: Sat Jun 01, 2013 4:49 pm
Re: Specification Req
Congratulations on your ASAT Classic LE. Enjoy! My first G&L was also a Tribute series. I still have it and have no plans to part with it.
Cheers, Dan
Cheers, Dan
-
- Posts: 7
- Joined: Mon Jul 16, 2018 12:35 am
Re: Specification Req
thanks a lot Dan. i am never parting with this, thats for sure.WitSok wrote:Congratulations on your ASAT Classic LE. Enjoy! My first G&L was also a Tribute series. I still have it and have no plans to part with it.
Cheers, Dan
Regards
Ganesh