Hey, G&L hivemind!
The 2005 ASAT Z-3 that I recently purchased seems to have a slightly loose input jack-- my cable crackles a little bit if I bump it. I previously had the same issue on my 2000 ASAT Classic and ended up needing to replace the jack. I was wondering if anyone had similar issues with their jacks and if there were any recommendations for tightening the jack (since it seems a bit recessed into the body)? I'm OK with replacing the jack if need be, but I thought I'd see how common this issue was for some of you all. I love my ASATs!
Loose ASAT input jack
-
- Posts: 981
- Joined: Sun Apr 20, 2014 3:52 am
- Location: Delaware
Re: Loose ASAT input jack
hello and welcome.
i had to replace the switchcraft jack on my '89 asat, re: would cut in and out.
never did it at home, but of course, found out at a gig
see http://www.switchcraft.com/productsumma ... Parent=884
and https://www.bassesbyleo.com/jack_replacement.html
i had to replace the switchcraft jack on my '89 asat, re: would cut in and out.
never did it at home, but of course, found out at a gig
see http://www.switchcraft.com/productsumma ... Parent=884
and https://www.bassesbyleo.com/jack_replacement.html
john o
-
- Posts: 198
- Joined: Mon Oct 31, 2011 4:52 pm
Re: Loose ASAT input jack
I have had trouble with them on two ASATs. This was a few years back, though. I had to have them replaced in both cases. Are they doing with Football jacks now?
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Loose ASAT input jack
lefty_major wrote:I have had trouble with them on two ASATs. This was a few years back, though. I had to have them replaced in both cases. Are they doing with Football jacks now?
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 635
- Joined: Sat Jun 01, 2013 4:49 pm
Re: Loose ASAT input jack
I have seen a few compliants about the barrel jack on ASATs. When I ordered my ASAT Classic S I specifically rrquested the "football" plate jack. G&L has now switched to the football plate jack as standard. I personally haven't had a problem with the barrel jacks, though I am pretty regimented in my rotation so they don't have a bunch of cycles on them yet.
Cheers, Dan
Cheers, Dan
-
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Loose ASAT input jack
My post seems to have been cut off.Craig wrote:lefty_major wrote:I have had trouble with them on two ASATs. This was a few years back, though. I had to have them replaced in both cases. Are they doing with Football jacks now?
Here's the rest:
Yes, the factory changed to the football side jacks beginning in 2012, see: http://www.guitarsbyleo.com/FORUM/viewt ... 571#p45571.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
- Posts: 20
- Joined: Tue Jun 05, 2018 3:24 pm
Re: Loose ASAT input jack
Thanks, everyone! This is great info. Glad to know it's not just my bad luck
Looks like I'll switch up the jack to the football type so I don't have to fret about it cutting out on me in the future.
Looks like I'll switch up the jack to the football type so I don't have to fret about it cutting out on me in the future.