Factory installed Sperzel locking tuners on a 1995-ish ASAT?

[stringthrough]

Hi everybody,

First time poster on this forum.

So my wife comes home with a 1995-ish ASAT (serial number 0045786) she purchased at a tag sale for a good price. After inspecting it I’m unsure as to whether the tuners were installed at the factory (custom order or special run) or after purchase by a buyer. There is only one “nib” hole adjacent to the larger shaft hole and it’s perfectly positioned for the “nib” on the tuner. I see no evidence that an original “nib” hole, one appropriate for a G&L tuner, was patched up. So my question is, is anyone aware of G&L offering Sperzel locking tuners (or for that any other non-G&L tuners) on a custom order or special run basis?

Thank you in advance for any assistance.

[Challenger]

Sperzel tuners have been used as original tuners by G&L. I have a 1995 Legacy Special that came with Sperzel locking tuners new.

[stringthrough]

Sperzel tuners have been used as original tuners by G&L. I have a 1995 Legacy Special that came with Sperzel locking tuners new.

Thanks Challenger!

[dhgleaves]

I think this http://www.guitarsbyleo.com/FORUM/viewt ... =12&t=3399 describes tuners used by G&L. The ones marked G&L are actually Schallers but Sperzels have definitely been used (my 90s Legacy had them originally).

[stringthrough]

I think this http://www.guitarsbyleo.com/FORUM/viewt ... =12&t=3399 describes tuners used by G&L. The ones marked G&L are actually Schallers but Sperzels have definitely been used (my 90s Legacy had them originally).

Thanks dhgleaves... I should mention the Sperzels on my ASAT do not have G&L stamped on them. Is it still safe to assume they were factory installed?

[dhgleaves]

I think this http://www.guitarsbyleo.com/FORUM/viewt ... =12&t=3399 describes tuners used by G&L. The ones marked G&L are actually Schallers but Sperzels have definitely been used (my 90s Legacy had them originally).

Thanks dhgleaves... I should mention the Sperzels on my ASAT do not have G&L stamped on them. Is it still safe to assume they were factory installed?

The Sperzels never had G&L stamped on them. It's the other ones (Schallers) that have the stamp although the locking ones apparently didn't back them. I think it's safe to say that either yours were factory installed, or Sperzel non-locking tuners were factory installed and someone switched them to locking. That's what I did with my 90s Legacy.

[stringthrough]

I think this http://www.guitarsbyleo.com/FORUM/viewt ... =12&t=3399 describes tuners used by G&L. The ones marked G&L are actually Schallers but Sperzels have definitely been used (my 90s Legacy had them originally).

Thanks dhgleaves... I should mention the Sperzels on my ASAT do not have G&L stamped on them. Is it still safe to assume they were factory installed?

The Sperzels never had G&L stamped on them. It's the other ones (Schallers) that have the stamp although the locking ones apparently didn't back them. I think it's safe to say that either yours were factory installed, or Sperzel non-locking tuners were factory installed and someone switched them to locking. That's what I did with my 90s Legacy.

Thanks!

... and here's a picture of the guitar.

https://photos.app.goo.gl/q2pCoOxBlL4JtGQ53

[dalto]

Nice ASAT! I love the jumbo MFDs

[stringthrough]

Nice ASAT! I love the jumbo MFDs

Thanks!... BTW, it's now up for sale on Reverb. Why? because I'm primarily a bassist and I already have all the guitars I need. Here's the link: https://reverb.com/item/12577285-g-l-as ... ing-system

[cho]

That is interesting about the Buzz Feiten tuning system. I haven't seen that on a G&L before. However, I thought the BF tuning system was comprised of a different nut, which allowed the different strings to have different lengths. The pictures of your guitar look like it has the stock nut.... So, what exactly is the BF tuning system on your guitar?

[stringthrough]

That is interesting about the Buzz Feiten tuning system. I haven't seen that on a G&L before. However, I thought the BF tuning system was comprised of a different nut, which allowed the different strings to have different lengths. The pictures of your guitar look like it has the stock nut.... So, what exactly is the BF tuning system on your guitar?

The nut was moved closer to the first fret (you can still see the line where the nut original sat) so as to compensate for the additional pressure needed to press strings unto frets that are closer to the nut. This additional pressure causes notes up the neck to sound a bit flat compared to ones played nearer to the nut.

[Craig]

Hi everybody,

First time poster on this forum.

So my wife comes home with a 1995-ish ASAT (serial number 0045786) she purchased at a tag sale for a good price. After inspecting it I’m unsure as to whether the tuners were installed at the factory (custom order or special run) or after purchase by a buyer. There is only one “nib” hole adjacent to the larger shaft hole and it’s perfectly positioned for the “nib” on the tuner. I see no evidence that an original “nib” hole, one appropriate for a G&L tuner, was patched up. So my question is, is anyone aware of G&L offering Sperzel locking tuners (or for that any other non-G&L tuners) on a custom order or special run basis?

Thank you in advance for any assistance.

The serial number is likely G04578; the neckplate serial numbers can be hard to read because the powdercoating can make the 'G' look like a '0'.
Regarding tuners used by G&L, see these posts in our G&L Knowledgebase forum: What tuners are used on G&L guitars (USA models)? and Locking tuners question.

Hope this helps.