New (to me) Guitar Day- Pre 2005 USA Legacy

The place to discuss, post photos, video, and audio of the G&L products (US instruments, stomp boxes, etc.) produced after 1991, including the amps & gear we use with them.
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

Just picked this up used in what seemed like a pretty nice deal for the price of a used MIM Fender Strat.

I am very impressed with the build quality and playability.
Easily as good or maybe better than any Fender Am Std or Am Deluxe Strat that I have had before.

I have a love/hate thing with Strats. I love them when others play them and when I do not so much. :happy0007:
Thought I would give G&L a try based upon user comments.

This setup amazingly well. It is a pre 2005 model I believe since it uses a 1/8" truss rod Allen wrench.
I tweaked the relief slightly down to .008".

Action setup low at 3/64" on high E with great intonation.
Stays in tune. Trem is smooth.
Not sure of fingerboard radius but feels like 12" which I like.
Neck has 1 11/16" nut width when I measured it and is fairly meaty. Have not measured it but maybe it is a Classic C plus.

Am figuring out how to use the Treble and Bass tone controls on the Legacy.
I am realizing that reducing the treble pot is really important. LOL.

Was thinking I would want to mod this and get a humbucker in to make it a HSS, but maybe not.

Very nice guitar.

Only question I have is suggestions on how to maximize Quack in the 2 and 4 positions.
Will play around with pickup heights and the tone settings I guess.




Image

Image

Image
User avatar
john o
Posts: 981
Joined: Sun Apr 20, 2014 3:52 am
Location: Delaware

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by john o »

sweet Legacy, sounds like you got a good deal on a nice guitar. when i switched from F strat to Legacy, I was most impressed with pickups (CLF-100 alnico), the quality of the bridge-tailpiece-vibrato unit (always thought that was the weak point of a strat) and the PTB tone control system which is extremely useful in all positions. I usually roll the treble down to 6-7 and bass down to 5-6. enjoy!
john o
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

drjho7 wrote:sweet Legacy, sounds like you got a good deal on a nice guitar. when i switched from F strat to Legacy, I was most impressed with pickups (CLF-100 alnico), the quality of the bridge-tailpiece-vibrato unit (always thought that was the weak point of a strat) and the PTB tone control system which is extremely useful in all positions. I usually roll the treble down to 6-7 and bass down to 5-6. enjoy!

Any suggestions on pickup height or how to set them relative to each other?

I am liking the Treble around 5-6 and the Bass around 7-8 on clean amp settings.
Fumble fingers
Posts: 2153
Joined: Fri Feb 15, 2013 12:11 pm
Location: Dayton , Ohio

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Fumble fingers »

I adjust mine for sound balance and usually end up with the bridge the highest/closest and neck lowest/farthest with the middle pup in between
,
Congrats and sweet guitar
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Craig »

Lkdog wrote: Not sure of fingerboard radius but feels like 12" which I like.
Neck has 1 11/16" nut width when I measured it and is fairly meaty. Have not measured it but maybe it is a Classic C plus.

Very nice! :thumbup:

Your Legacy has the optional #4 neck (1 11/16 inch nut width, 2 1/4 inch width at body joint, 12-inch radius), see: What are the USA neck size options, past and present?.
And you are right it is similar to the current "Classic C plus" neck.

When you get a chance, please add your Legacy to our G&L Registry.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

Craig wrote:
Lkdog wrote: Not sure of fingerboard radius but feels like 12" which I like.
Neck has 1 11/16" nut width when I measured it and is fairly meaty. Have not measured it but maybe it is a Classic C plus.

Very nice! :thumbup:

Your Legacy has the optional #4 neck (1 11/16 inch nut width, 2 1/4 inch width at body joint, 12-inch radius), see: What are the USA neck size options, past and present?.
And you are right it is similar to the current "Classic C plus" neck.

When you get a chance, please add your Legacy to our G&L Registry.

:ugeek:

You are right! It is 2 1/4" at the body joint.
I am used to 12" radius necks and this feels great.
First Strat I ever really enjoyed playing.
Will add it to the registry. The guy I bought it from thought it was mid-2000 but was not sure.

Here is serial number FWIW.
Image
User avatar
dhgleaves
Posts: 281
Joined: Mon Dec 19, 2016 3:54 pm
Location: Adelaide, South Australia

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by dhgleaves »

It seems that it's already in the registry. Either that or you just did it.
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

dhgleaves wrote:It seems that it's already in the registry. Either that or you just did it.

Nope. Wasn't me.
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Craig »

Lkdog wrote:
dhgleaves wrote:It seems that it's already in the registry. Either that or you just did it.

Nope. Wasn't me.
Just go ahead and edit the existing entry and change the ownership to yourself.
A previous owner forgot to remove ownership when it was sold.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

Craig wrote:
Lkdog wrote:
dhgleaves wrote:It seems that it's already in the registry. Either that or you just did it.

Nope. Wasn't me.
Just go ahead and edit the existing entry and change the ownership to yourself.
A previous owner forgot to remove ownership when it was sold.

:ugeek:

I see it there,but it says I am not a registered GuitarsbyLeo user when I go to edit.
No biggie.

Thanks for the info on this. Really like this guitar.
User avatar
Craig
Site Admin
Posts: 11349
Joined: Tue Mar 03, 2009 10:52 am
Location: Either Coto De Caza, CA or Paso Robles, CA

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Craig »

Lkdog wrote:
Craig wrote:
Lkdog wrote:
dhgleaves wrote:It seems that it's already in the registry. Either that or you just did it.

Nope. Wasn't me.
Just go ahead and edit the existing entry and change the ownership to yourself.
A previous owner forgot to remove ownership when it was sold.

:ugeek:

I see it there,but it says I am not a registered GuitarsbyLeo user when I go to edit.
No biggie.

Thanks for the info on this. Really like this guitar.
Please see this post: Welcome! Read This First.

Hope this helps.

:ugeek:
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
User avatar
WitSok
Posts: 635
Joined: Sat Jun 01, 2013 4:49 pm

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by WitSok »

Sweet looking Legacy, love the body match headstock! Proof that model delete isn't necessary as default for paintes headstocks!

Fumble Fingers has a good seggestion about ajusting the heights for balance. On G&L's FAQ page, it suggest using the old set-up guide as a good place to start. The micro tilt part and adjustable pole pieces obviosly don't apply...

http://www.glguitars.com/faq/GLmanual.pdf

Congratulations again, CAR is a great color.

Cheers,
Dan
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

WitSok wrote:Sweet looking Legacy, love the body match headstock! Proof that model delete isn't necessary as default for paintes headstocks!

Fumble Fingers has a good seggestion about ajusting the heights for balance. On G&L's FAQ page, it suggest using the old set-up guide as a good place to start. The micro tilt part and adjustable pole pieces obviosly don't apply...

http://www.glguitars.com/faq/GLmanual.pdf

Congratulations again, CAR is a great color.

Cheers,
Dan

Will check that out. Thanks!
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

Fumble fingers wrote:I adjust mine for sound balance and usually end up with the bridge the highest/closest and neck lowest/farthest with the middle pup in between
,
Congrats and sweet guitar

Good tip. I just checked how it came to me and the previous owner did do it that way.
Thanks.
Lkdog
Posts: 11
Joined: Tue Nov 14, 2017 12:10 am

Re: New (to me) Guitar Day- Pre 2005 USA Legacy

Post by Lkdog »

Craig wrote:
Lkdog wrote:
Craig wrote:
Lkdog wrote:
dhgleaves wrote:It seems that it's already in the registry. Either that or you just did it.

Nope. Wasn't me.
Just go ahead and edit the existing entry and change the ownership to yourself.
A previous owner forgot to remove ownership when it was sold.

:ugeek:

I see it there,but it says I am not a registered GuitarsbyLeo user when I go to edit.
No biggie.

Thanks for the info on this. Really like this guitar.
Please see this post: Welcome! Read This First.

Hope this helps.

:ugeek:

Got it sorted out. Updated it a bit. If I take the neck off anytime will look for date on that.
Thanks.