Sat Apr 01, 2017 8:13 pm
Sun Apr 02, 2017 7:12 am
Mon Apr 03, 2017 11:03 am
Mon Apr 03, 2017 1:15 pm
Mon Apr 03, 2017 9:45 pm
Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?
Tue Apr 04, 2017 11:46 pm
Craig wrote:Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?
Are you sure it is 2003 built? If so, it would be 1/8" otherwise it would be a 4mm wrench for mid-2006 to mid-2013.
You can get a replacement nut from the G&L On-Line Store: REPLACEMENT TRUSS ROD NUT KIT ( 80' - 06' ) or REPLACEMENT TRUSS ROD NUT ( mid-2006 to mid-2013).
Hope this helps.
Wed Apr 05, 2017 7:00 am
Brobb wrote:Craig wrote:Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?
Are you sure it is 2003 built? If so, it would be 1/8" otherwise it would be a 4mm wrench for mid-2006 to mid-2013.
You can get a replacement nut from the G&L On-Line Store: REPLACEMENT TRUSS ROD NUT KIT ( 80' - 06' ) or REPLACEMENT TRUSS ROD NUT ( mid-2006 to mid-2013).
Hope this helps.
Body says 2003... Not sure how I confirm if the neck is the original one or not... Talked with the guy I bought it off of and he said he just used whatever allen key seemed to fit... That might be where my problem is.. Just hoping a wrong threaded nut was not forced on by original owner... Guitar seems to have been tinkered with quite a bit.