I did a search and did not come up with this if it does exist.
I am considering options for pickup replacements. There are complete pick guards wired and ready to drop in. Is the Legacy pick guard identical and interchangeable with a Fender Strat 8-screw pick guard?
Pick Guards
-
Craig
- Site Admin
- Posts: 11349
- Joined: Tue Mar 03, 2009 10:52 am
- Location: Either Coto De Caza, CA or Paso Robles, CA
Re: Pick Guards
I am quite certain they are not interchangeable. Plus, you would loose the Legacy's PTB system wiring as well.Michael-GnL-Michael wrote:I did a search and did not come up with this if it does exist.
I am considering options for pickup replacements. There are complete pick guards wired and ready to drop in. Is the Legacy pick guard identical and interchangeable with a Fender Strat 8-screw pick guard?
Hope this helps.
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options
-
otis66
- Posts: 60
- Joined: Mon Jun 20, 2011 8:20 am
- Location: Dover NJ
Re: Pick Guards
I tried installing a G&L Legacy pickgaurd to a Fender Strat body and it does not fit. The Fender Strat body was NOT a swimming pool body. The pick up holes and the bridge did not line up. The G&L Legacy pick gaurd is Shorter at the neck pocket and shorter at the bridge so it will not line up right. The Fender Strat pick gaurd will not fit a Legacy body because the neck pocket is diff. Slightly wider in the neck. The Fender Strat pick gaurd is also slightly longer in areas so it will not fit. The Fender Strat body I was using was for a MIA Strat with 11 holes and two post trem.
-
otis66
- Posts: 60
- Joined: Mon Jun 20, 2011 8:20 am
- Location: Dover NJ
Re: Pick Guards
What I did when replaceing the pick ups on my G&L Legacy. I bought a fender Stratocaster Pick gaurd. I removed the G&L legacy pick ups/vol.tone tone. pots as one piece still wired, and installed them on the Fender Strat Pick gaurd. I then installed my Kinman pick ups with new vol. tone tone pots on the G&L pick gaurd. I keep my G&L Legacy pick up assembly on the Fender Stratocaster pick gaurd for storage.
-
felixq78
- Posts: 9
- Joined: Wed Jun 02, 2010 2:25 pm
- Location: Sydney Australia
Re: Pick Guards
The 1991-92 ASAT Classic Leo Fender Commemorative (geeeez what a long name ) isn't interchangeable with the Telecaster pickguard.
While we're on metal (gold coloured) pickguards what is an appropriate metal polish for this pickquard ? I've used Silvo on other, so called gold hardware and it faded the gold colour. any ideas on the ASAT ?
While we're on metal (gold coloured) pickguards what is an appropriate metal polish for this pickquard ? I've used Silvo on other, so called gold hardware and it faded the gold colour. any ideas on the ASAT ?
-
timewave
- Posts: 146
- Joined: Sat Feb 11, 2012 4:34 pm
Re: Pick Guards
Hey There
Try looking on greasygroove.com you might find what your looking for there.
Try looking on greasygroove.com you might find what your looking for there.