|
Register •
FAQ
• Search • Login
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Author |
Message |
tbonesullivan
Joined: Mon Feb 20, 2012 7:12 am Posts: 34
|
Legacy Pickup Dimensions
I am currently in the process of switching out the pickup covers on the Dimarzio Injector pickups that are installed on my 2010 Legacy Special. During this process I hit a snag, so during the delay I figured I might as well replace the pickguard too, as the previous owners scratched it up a bunch, and it also has yellowed quite a bit on the front in the 7 years it's been around. I can clearly see this around the knobs.
So, issue is whether to get the 600 pickguard, which it had, or to go for a 611, which is recommended for non G&L pickups.
Does anyone have the dimensions for the G&L single coils and/or Dual Blade pickups? The Hum Cancelling dimarzios are slightly bigger than standard strat pickups, but I don't know how big the G&L ones are. The pickups I have are 2.77 X .72 inches. Standard strat pickups are 2.74 X .69 inches.
|
Mon Jan 01, 2018 1:32 pm |
|
|
Craig
Site Admin
Joined: Tue Mar 03, 2009 10:52 am Posts: 10979 Location: Either Coto De Caza, CA or Paso Robles, CA
|
Re: Legacy Pickup Dimensions
tbonesullivan wrote: I am currently in the process of switching out the pickup covers on the Dimarzio Injector pickups that are installed on my 2010 Legacy Special. During this process I hit a snag, so during the delay I figured I might as well replace the pickguard too, as the previous owners scratched it up a bunch, and it also has yellowed quite a bit on the front in the 7 years it's been around. I can clearly see this around the knobs.
So, issue is whether to get the 600 pickguard, which it had, or to go for a 611, which is recommended for non G&L pickups.
Does anyone have the dimensions for the G&L single coils and/or Dual Blade pickups? The Hum Cancelling dimarzios are slightly bigger than standard strat pickups, but I don't know how big the G&L ones are. The pickups I have are 2.77 X .72 inches. Standard strat pickups are 2.74 X .69 inches. The G&L CLF100 Alnico single coil middle pickup measurement I get is 2.74 X .70 inches. This is from my ASAT Classic S Alnico Launch Edition model. Hope this helps.
_________________ --Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000] Welcome! Read This First Got a G&L question? Check out the: G&L Knowledgebase Current G&L Specifications and Options
|
Mon Jan 01, 2018 2:35 pm |
|
|
tbonesullivan
Joined: Mon Feb 20, 2012 7:12 am Posts: 34
|
Re: Legacy Pickup Dimensions
awesome! Thanks so much. I'll have to check my other Legacy as well.
|
Mon Jan 01, 2018 3:09 pm |
|
|
umma_gumma
Joined: Tue Jan 18, 2011 12:40 am Posts: 47
|
Re: Legacy Pickup Dimensions
this is interesting
I was recently comparing my Strat to my Legacy
the strat pups can be set much closer to the strings than the legacy; due to the higher neck/bridge distance off the top on the G&L
I find I need to max out the legacy pup heights to get anywhere near the strats sound & output
I was considering shaving down the "wings" on the legacy pups, so I could raise them even higher
I suspect the MFD pickups that G&L used before the legacy was designed, have a much higher output & thus this wasn't an issue?
however with vintage style alnico pups, it is more noticeable
....what do you guys think?
|
Mon Jan 08, 2018 4:17 am |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|
|