|
Page 1 of 1
|
[ 7 posts ] |
|
Author |
Message |
reevus
Joined: Sat Apr 23, 2011 6:22 am Posts: 11
|
ASAT Z3 Questions
Does it sound correct that older ASAT Z3 models (say pre-2004 or so) didn't have the pull/push tone pot that current models do which allows for more pickup combinations? If that's the case, does anyone know if those older pickups can be wired to a new, installed pull/push pot to bring the capabilities up to current level without a lot of headache? Anybody knows if G&L sells that pot (I'll have a look at the website, but will ask here while I'm at it).
Also, the Z3 pickups are noiseless?
Thanks much.
|
Sun Mar 10, 2013 7:14 am |
|
|
louis cyfer
Joined: Tue Oct 25, 2011 2:58 pm Posts: 3011
|
Re: ASAT Z3 Questions
yes they are noiseless, yes you can install a new pot, a push pull is a huge pain to use effectively, a push push is far more usable. you can get either at allparts.
|
Sun Mar 10, 2013 8:12 am |
|
|
Craig
Site Admin
Joined: Tue Mar 03, 2009 10:52 am Posts: 10979 Location: Either Coto De Caza, CA or Paso Robles, CA
|
Re: ASAT Z3 Questions
reevus wrote: Does it sound correct that older ASAT Z3 models (say pre-2004 or so) didn't have the pull/push tone pot that current models do which allows for more pickup combinations? If that's the case, does anyone know if those older pickups can be wired to a new, installed pull/push pot to bring the capabilities up to current level without a lot of headache? Anybody knows if G&L sells that pot (I'll have a look at the website, but will ask here while I'm at it).
Also, the Z3 pickups are noiseless?
Thanks much. Yes, the early ASAT Z-3 models did not have the expander switch (or pull/push pot). Here' s a picture of the wiring for the current ASAT Z-3 and Will Ray Signature model: No, the push/pull pot is not available from the G&L On-Line store. You might check with a local G&L dealer and see if they can get one for you. Yes, the Z-coils are noiseless. here's a photo of them with the cover off: Hope this helps.
_________________ --Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000] Welcome! Read This First Got a G&L question? Check out the: G&L Knowledgebase Current G&L Specifications and Options
|
Sun Mar 10, 2013 8:22 pm |
|
|
NickHorne
Joined: Wed May 26, 2010 11:44 am Posts: 784 Location: England
|
Re: ASAT Z3 Questions
Alternatively, you could use a toggle (double pole, double throw). Look at the pic on the GLDP home page, where a switch is fitted between the pots. Although I do suggest you think about placing it a little nearer the tone pot, and not just mathematically in the middle of the two - if you roll your knobs round with your pinky, you'll find you don't need to access the "neck" side of the knobs, just the "tail" sides. So give your volume-pinky some room. I'm only talking about a few millimetres, but it all helps.
The Z-3 is a great thing. It is my "desert island" electric, no contest.
|
Mon Mar 11, 2013 12:20 pm |
|
|
Craig
Site Admin
Joined: Tue Mar 03, 2009 10:52 am Posts: 10979 Location: Either Coto De Caza, CA or Paso Robles, CA
|
Re: ASAT Z3 Questions
Craig wrote: reevus wrote: Does it sound correct that older ASAT Z3 models (say pre-2004 or so) didn't have the pull/push tone pot that current models do which allows for more pickup combinations? If that's the case, does anyone know if those older pickups can be wired to a new, installed pull/push pot to bring the capabilities up to current level without a lot of headache? Anybody knows if G&L sells that pot (I'll have a look at the website, but will ask here while I'm at it).
Also, the Z3 pickups are noiseless?
Thanks much. Yes, the early ASAT Z-3 models did not have the expander switch (or pull/push pot). Here' s a picture of the wiring for the current ASAT Z-3 and Will Ray Signature model: No, the push/pull pot is not available from the G&L On-Line store. You might check with a local G&L dealer and see if they can get one for you. Yes, the Z-coils are noiseless. here's a photo of them with the cover off: Hope this helps. Forgot to mention this post in our G&L Knowledgebase: List of Regular Production ASAT-style guitars (USA).
_________________ --Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000] Welcome! Read This First Got a G&L question? Check out the: G&L Knowledgebase Current G&L Specifications and Options
|
Mon Mar 11, 2013 5:06 pm |
|
|
reevus
Joined: Sat Apr 23, 2011 6:22 am Posts: 11
|
Re: ASAT Z3 Questions
Thanks all for the comments and info - a big help.
Steve P.
|
Thu Mar 14, 2013 7:10 am |
|
|
Craig
Site Admin
Joined: Tue Mar 03, 2009 10:52 am Posts: 10979 Location: Either Coto De Caza, CA or Paso Robles, CA
|
Re: ASAT Z3 Questions
Update regarding push/pull pots: they are now available from the G&L On-Line Store.
_________________ --Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000] Welcome! Read This First Got a G&L question? Check out the: G&L Knowledgebase Current G&L Specifications and Options
|
Sun Jul 14, 2013 8:21 am |
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|
|