Sat Feb 19, 2011 6:21 pm
Sat Feb 19, 2011 6:58 pm
NMyTree wrote:How difficult or complicated would it be to change the pickup covers on the ASAT Special Semi-Hollow's MFD? Are the pickup covers glued or sealed around the pickup, itself?
NMyTree wrote:How about the pickguard?
NMyTree wrote:How about that chrome metal strip that the volume and tone knobs and pup switch sits on?
I've seen a few pictures of that metal strip in black. Does G&L have them (that meatl strip) for sale in black?
Sat Feb 19, 2011 8:47 pm
Fri Feb 25, 2011 9:56 am
Sat Feb 26, 2011 8:27 pm
Sun Feb 27, 2011 1:01 pm
NMyTree wrote:Another question.....
I've seen some pics of this (ASAT Special Semi-Hollow) guitar with black bridges. Is that an option available from G&L when ordering a new guitar? Is it possible to order a black bridge to replace the chrome one currently on this guitar?
Tue Apr 19, 2011 11:36 am
Tue Apr 19, 2011 11:41 am
Tue Apr 19, 2011 11:57 am
NMyTree wrote:Has anyone ever tried those Control Plates from Stewart-Mac? These.....
http://www.stewmac.com/shop/Hardware,_p ... es#details
Any idea if these are the correct size/dimensions?
Tue Apr 19, 2011 12:14 pm
brianr0131 wrote:NMyTree wrote:Has anyone ever tried those Control Plates from Stewart-Mac? These.....
http://www.stewmac.com/shop/Hardware,_p ... es#details
Any idea if these are the correct size/dimensions?
Just measured my 86 ASAT and the length and screw holes are both a tiny bit longer than these dimensions. I don't think this plate will work.
Tue Apr 19, 2011 1:03 pm
Tue Apr 19, 2011 1:42 pm
Thumbs wrote:Your 2006 control plate should be a standard Tele length. The longer plates were only used on the 3-bolt neck ASATs. You could use VHT (Brand) Black wrinkle paint to get a similar look to the '86 era G&L's.
Tue Apr 19, 2011 2:20 pm