Tue Jan 09, 2018 2:07 pm
Tue Jan 09, 2018 8:03 pm
Sat Jan 13, 2018 8:58 pm
DugT wrote:The screws in it now are about 10mm long and they stick out enough to be uncomfortable during palm muting. 6mm long would be ideal. Thanks for any suggestions.
DugT wrote:I cut them down myself and it was much easier than I thought it would be. I used a dremel moto tool with a cutting disk. After cutting I filed the edges and bottoms with a fine steel file and then I polished the bottoms with some 320 grit wet-dry sandpaper. So far I only did the four screws for the 5th and 6th strings and that made a big improvement. I could leave it at that but I think I'll trim the screws on the 4th and 3rd strings too because it is easy to do.
Sun Jan 14, 2018 10:04 am