2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Sat Apr 01, 2017 8:13 pm

Good evening,
So I went to adjust my truss rod on my newly bought used 2003 Asat and noticed my allen keys just do circles.. the nut is stripped... Does anyone know if these nuts are replaceable? or am I in trouble? I know I can probably get a machinist to get it out as long as it isn't welded to the rod... PLEASE SOMEONE TELL ME IT'S NOT ATTACHED TO THE ROD.......

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Sun Apr 02, 2017 7:12 am

Brobb, a 2003 American model should have a 1/8 in allen size and can be removed and replaced. There are different ways of removing it but before installing the new nut, I suggest cutting a screwdriver slot across the top with a hack saw before installing, therefore if it happens again, it can simply be removed with a flat blade screwdriver. -- Darwin

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Mon Apr 03, 2017 11:03 am

It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Mon Apr 03, 2017 1:15 pm

That is confusing as 3mm is larger than 1/8 in. -- Darwin
Here is the link to the information you may need.

viewtopic.php?f=13&t=43#p42

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Mon Apr 03, 2017 9:45 pm

Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?


Are you sure it is 2003 built? If so, it would be 1/8" otherwise it would be a 4mm wrench for mid-2006 to mid-2013.

You can get a replacement nut from the G&L On-Line Store: REPLACEMENT TRUSS ROD NUT KIT ( 80' - 06' ) or REPLACEMENT TRUSS ROD NUT ( mid-2006 to mid-2013).

Hope this helps.

:ugeek:

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Tue Apr 04, 2017 11:46 pm

Craig wrote:
Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?


Are you sure it is 2003 built? If so, it would be 1/8" otherwise it would be a 4mm wrench for mid-2006 to mid-2013.

You can get a replacement nut from the G&L On-Line Store: REPLACEMENT TRUSS ROD NUT KIT ( 80' - 06' ) or REPLACEMENT TRUSS ROD NUT ( mid-2006 to mid-2013).

Hope this helps.

:ugeek:


Body says 2003... Not sure how I confirm if the neck is the original one or not... Talked with the guy I bought it off of and he said he just used whatever allen key seemed to fit... That might be where my problem is.. Just hoping a wrong threaded nut was not forced on by original owner... Guitar seems to have been tinkered with quite a bit.

Re: 2003 G&L ASAT SPECIAL STRIPPED TRUSS ROD NUT.....

Wed Apr 05, 2017 7:00 am

Brobb wrote:
Craig wrote:
Brobb wrote:It's strange because my Nut seems to be Metric.. 3mm.. 1/8 is just a bit to big for the allen key hole.. Where do I get replacement nuts for a 2003?


Are you sure it is 2003 built? If so, it would be 1/8" otherwise it would be a 4mm wrench for mid-2006 to mid-2013.

You can get a replacement nut from the G&L On-Line Store: REPLACEMENT TRUSS ROD NUT KIT ( 80' - 06' ) or REPLACEMENT TRUSS ROD NUT ( mid-2006 to mid-2013).

Hope this helps.

:ugeek:


Body says 2003... Not sure how I confirm if the neck is the original one or not... Talked with the guy I bought it off of and he said he just used whatever allen key seemed to fit... That might be where my problem is.. Just hoping a wrong threaded nut was not forced on by original owner... Guitar seems to have been tinkered with quite a bit.


Please post some photos of the guitar (front and back) and include a photo showing the serial number.

:ugeek: