View unanswered posts | View active topics It is currently Thu Mar 28, 2024 6:40 am




This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
 The G&L non-compression truss rod 
Author Message
Site Admin
User avatar

Joined: Tue Mar 03, 2009 10:52 am
Posts: 10979
Location: Either Coto De Caza, CA or Paso Robles, CA
Post The G&L non-compression truss rod
From G&L's main website Features page:

Quote:
G&L's latest neck construction is the result of intensive research and development, using our latest Computer Aided Design (CAD) efforts,
Computer Numerically Controlled (CNC) technology, special diagnostic functions of our Plek Pro machine, and of course, the skilled hands, eyes
and ears of our craftsmen.

Our latest construction methodology uses a one piece neck blank with the truss rod installed underneath the fingerboard. In the case of an all-maple neck,
a layer of the maple neck blank is sliced off, and this slice becomes the fingerboard, ensuring a consistent appearance of a solid, one-piece maple neck.

Truss rod technology has evolved over the years, and G&L has carefully studied design options before finalizing its latest design. This contemporary design
incorporates a secondary, flat-sided rod which bows away from primary rod. Unlike a vintage truss rod, this design does not compress the neck longitudinally
in order to function; compression contributes to distortion of the fingerboard curvature. Operation is both fluid and accurate with the articulation of the neck,
the "relief", being very consistent across the length of the neck. Unlike similar rods available today, G&L's rod has an additional anchor for the heel end of the neck,
to help ensure long-term stability and ensure that the rod will never shear through the adjustment end of the neck. Finally, the channel for the rod is also carefully
designed to provide a snug fit for the rod while ensuring free and complete articulation.

While we at G&L maintain great respect for the innovative bi-cut design pioneered by our founder, Leo Fender†, he would have expected that we continue to improve
G&L instruments to better serve musicians. To fulfill this expectation, it means that we must be unafraid to change something that we had once viewed as state-of-the-art.
However, there is but one certainty about state-of-the-art; it changes as improvements are made.


Below: Presentation of the Bi-Cut design

Quote:
The Bi-Cut neck design was another revolutionary patent granted to Leo and G&L. The traditional method of truss rod installation involves
routing out the back side of the neck, installing the truss rod and covering the route with a rosewood stripe commonly referred to as a skunk stripe.
Alternatively, a traditional installation puts the route for the truss rod from the face of the neck, covering it with the fingerboard.

The Bi-Cut method involves cutting the neck blank in half longitudinally, making a route on the inside, inserting the truss rod then gluing the two halves together.
The new completed neck blank is then put in a Taylor press with approximately 350 pounds of pressure, assuring a nearly invisible truss rod installation.
The design goal that the Bi-Cut method achieves is exceptional resistance to warping and twisting, because the centrally located glue joint is actually stronger
than the wood on either side.


Image

† The personal name, likeness and signature of Mr. Clarence Leo Fender are property of G&L Musical Instruments / BBE Sound, Inc. and may not be used in any commercial capacity without prior approval.
For commercial enquiries regarding the use of the "Leo Fender" name, likeness or signature, please contact us. G&L is not associated with Fender Musical Instruments Corporation.


Reference link on G&L website: The G&L non-compression truss rod.

_________________
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options


Last edited by Craig on Mon Jan 22, 2024 2:39 am, edited 3 times in total.

added reference link to G&L website (Internet Archive)



Tue Jun 21, 2016 8:02 am
Profile WWW
Display posts from previous:  Sort by  
This topic is locked, you cannot edit posts or make further replies.   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware.