View unanswered posts | View active topics It is currently Thu Mar 28, 2024 11:25 am




Reply to topic  [ 9 posts ] 
 Neck Finishes 
Author Message

Joined: Wed Apr 28, 2010 4:30 pm
Posts: 1516
Location: Ontario,Canada
Post Neck Finishes
Does G&L have a 'bare' neck finish, like a tung oil or tru oil? I noticed gun oil gloss, but that sounds as if it is just a tint then a spray anyway. ((I suppose I can always strip the finish when I get it anyway if they don't wouldn't be the first time))


Thu Apr 29, 2010 6:24 pm
Profile
Site Admin
User avatar

Joined: Tue Mar 03, 2009 10:52 am
Posts: 10979
Location: Either Coto De Caza, CA or Paso Robles, CA
Post Re: Neck Finishes
sirmyghin wrote:
Does G&L have a 'bare' neck finish, like a tung oil or tru oil? I noticed gun oil gloss, but that sounds as if it is just a tint then a spray anyway. ((I suppose I can always strip the finish when I get it anyway if they don't wouldn't be the first time))


No, they don't have that finish option. There is the Clear Satin finish, the optional Clear Gloss finish, and the optional Gun-oil Gloss finish. The Rustic models come with Nitrocellulose Lacquer Gun-Oil Gloss finish. The SC-2 comes with a Gun Oil Tint finished with Satin on the back and Gloss on the headstock face. The Tribute models (except the Tribute Comanche and Tribute L-2000 Carved Top) have a Clear Satin finish. The Tribute Comanche and Tribute L-2000 Carved Top with maple fretboard each have a Vintage Gloss finish. The Tribute L-2000 Carved Top with rosewood fretboard has a Clear Gloss finish.

Hope this helps.

_________________
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options


Thu Apr 29, 2010 8:01 pm
Profile WWW
User avatar

Joined: Fri Feb 26, 2010 6:06 pm
Posts: 132
Location: St. Louis, Missouri
Post Re: Neck Finishes
Try the G&L JD5. They have a "bare neck finish" Very clean feel to them. They were produced 2004-2007.
Pretty rare. They only made a handfull of them due to "break down in negotiations"


Fri Apr 30, 2010 5:47 am
Profile
Site Admin
User avatar

Joined: Tue Mar 03, 2009 10:52 am
Posts: 10979
Location: Either Coto De Caza, CA or Paso Robles, CA
Post Re: Neck Finishes
HLG wrote:
Try the G&L JD5. They have a "bare neck finish" Very clean feel to them. They were produced 2004-2007.
Pretty rare. They only made a handfull of them due to "break down in negotiations"


Hmm, here's a screenshot of the old spec webpage for the ASAT JD-5.
Image
I have the guitar shown in the picture and it does have a Satin finished neck.

We also have 7 registered in the G&L Registry and a couple say they have a gloss neck and none mention a bare neck finish.
Hey, Mac (Burnt999), if you are out there reading this, do any of your JD-5's have the bare neck finish?

I do remember that the 1984-1991 Rampage model had an oiled neck. According to Gabe (GPD):
"The back of the neck was hand oiled using Birchwood Casey Tru-Oil and the headstock face was shot with a color coat and clear."

_________________
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options


Fri Apr 30, 2010 8:01 am
Profile WWW
User avatar

Joined: Fri Feb 26, 2010 6:06 pm
Posts: 132
Location: St. Louis, Missouri
Post Re: Neck Finishes
Yes, I see where a couple of them do say GOT. I have one of those seven listed. I'll have to pull mine out and take another look but I noticed the different neck finish right away. I'll see if I can get some good closeups and post them.
Where did you find that screenshot of the JD5? I was looking for it a while back and just assumed G&L had permenatly removed it.


Fri Apr 30, 2010 9:13 am
Profile
Site Admin
User avatar

Joined: Tue Mar 03, 2009 10:52 am
Posts: 10979
Location: Either Coto De Caza, CA or Paso Robles, CA
Post Re: Neck Finishes
HLG wrote:
Yes, I see where a couple of them do say GOT. I have one of those seven listed. I'll have to pull mine out and take another look but I noticed the different neck finish right away. I'll see if I can get some good closeups and post them.
Where did you find that screenshot of the JD5? I was looking for it a while back and just assumed G&L had permenatly removed it.


Also, the JD-5 neck was one of the first (and possibly the first) to have rolled edges and which was added to the standard neck production after that.

Where did I get that screenshot? Well, I happen to be real close to the guy that does G&L's website updates. ;)

_________________
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options


Fri Apr 30, 2010 10:48 am
Profile WWW

Joined: Wed Apr 28, 2010 4:30 pm
Posts: 1516
Location: Ontario,Canada
Post Re: Neck Finishes
Good info, as I said a minor thing , hitting the satin with some steel wool every now and then is good enough to keep em from getting 'sticky' Can't abide gloss finished however on necks anymore. Nitro is some of the worse as it wears off under your hands in pills (I sweat a lot btw). I am sure if I did something like remove the finish my warranty would be moot. But after a few years and confidence in neck stability I might not care. Shame I have to negotiate to a dealer, so much easy to run things by a company and just 'talk' when you don't expect the dealer to not relay any possible 'non standards' and not just not try and bone you.


Fri Apr 30, 2010 11:15 am
Profile
User avatar

Joined: Fri Feb 26, 2010 6:06 pm
Posts: 132
Location: St. Louis, Missouri
Post Re: Neck Finishes
Took a couple of photos of the neck. Looks like it is a satin finish. You'd never know it by feel though.
Very clean and natural feel to it.

Image
Image

Craig wrote:
HLG wrote:
Try the G&L JD5. They have a "bare neck finish" Very clean feel to them. They were produced 2004-2007.
Pretty rare. They only made a handfull of them due to "break down in negotiations"


Hmm, here's a screenshot of the old spec webpage for the ASAT JD-5.
Image
I have the guitar shown in the picture and it does have a Satin finished neck.

We also have 7 registered in the G&L Registry and a couple say they have a gloss neck and none mention a bare neck finish.
Hey, Mac (Burnt999), if you are out there reading this, do any of your JD-5's have the bare neck finish?[url][/url]


Mon May 10, 2010 5:25 pm
Profile
Site Admin
User avatar

Joined: Tue Mar 03, 2009 10:52 am
Posts: 10979
Location: Either Coto De Caza, CA or Paso Robles, CA
Post Re: Neck Finishes
Craig wrote:
HLG wrote:
Try the G&L JD5. They have a "bare neck finish" Very clean feel to them. They were produced 2004-2007.
Pretty rare. They only made a handfull of them due to "break down in negotiations"


Hmm, here's a screenshot of the old spec webpage for the ASAT JD-5.
Image
I have the guitar shown in the picture and it does have a Satin finished neck.

We also have 7 registered in the G&L Registry and a couple say they have a gloss neck and none mention a bare neck finish.
Hey, Mac (Burnt999), if you are out there reading this, do any of your JD-5's have the bare neck finish?

I do remember that the 1984-1991 Rampage model had an oiled neck. According to Gabe (GPD):
"The back of the neck was hand oiled using Birchwood Casey Tru-Oil and the headstock face was shot with a color coat and clear."


I just got mine out again and I am mistaken on the neck finish of mine. It is a clear Gloss finish, not a Satin finish. :oops:

Here's a photo of the neck:
Image

:ugeek:

_________________
--Craig [co-webmaster of guitarsbyleo.com, since Oct. 16, 2000]
Welcome! Read This First
Got a G&L question? Check out the: G&L Knowledgebase
Current G&L Specifications and Options


Wed Feb 03, 2016 3:53 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware.